437
Dinner on the nature
These craft on a tube - a billion pieces.
But, dear fellow party members and bayanoubiytsy!
Despite this the number of copies on the network, I talk a little about the nuances,
personal achievements, are not in a tube ... I do not get it at all at first once. And I did not have to happen first.
Will be 26 photos
We cut off the two bottom. How do you know the height of the inner cylinder?
Fold the two halves to overlap and compete on the bottom line to the bottom.
I came out 25 mm. Make a reservation, I do for fun of the little stove, 0, 25 l. cans.
Next. It is important to make a smooth inner cylinder.
To this end, I found initially smooth pattern desired width,
and cut without releasing pressure from two sides.
Sorry if kept waiting!
Until now nervous when creating the post)))
Okay, the resulting strip turns onto his little finger into a tube.
This is in order to plump she sat in the flute.
That's the way it sits by itself
Meanwhile, the other half wearing for the rest of the banks, in order to cut the duct and mash it.
It is desirable that even rotating the half-apex, so razvaltsevat edge.
scratched with a knife five revolutions, pierces the same knife in one place, and then dodavlivat finger.
What pliers ?????
Thumbnail (hand) zavaltsovuyu end lower compartment.
Notice the three slots in the inner cylinder!
(you can see two of them)
Well, here's the first part of the ballet marlezonskogo and over.
We gather it all in a bunch. Gently and slowly. You can grease the bottom of a little water.
Kohl four holes (they are visible) and two bukovki P from wires.
Fill fluid fireplaces,
and ignite!
Baldeem
This cup of water I boiled for 5 minutes to 15 grams of alcohol.
(but it's indoors, go further on the nature, your mother)
This is for scale
What were all sayings, but now the Tale!
Take with a super-mega-Soup!
1. Harvesting from Pat, matches, nail file from elektolobzika.
2. Soviet screwdriver with cone head.
3.Poplavok in PETe.
4.Naher I cramped concrete ????
Source:
But, dear fellow party members and bayanoubiytsy!
Despite this the number of copies on the network, I talk a little about the nuances,
personal achievements, are not in a tube ... I do not get it at all at first once. And I did not have to happen first.
Will be 26 photos
We cut off the two bottom. How do you know the height of the inner cylinder?
Fold the two halves to overlap and compete on the bottom line to the bottom.
I came out 25 mm. Make a reservation, I do for fun of the little stove, 0, 25 l. cans.
Next. It is important to make a smooth inner cylinder.
To this end, I found initially smooth pattern desired width,
and cut without releasing pressure from two sides.
Sorry if kept waiting!
Until now nervous when creating the post)))
Okay, the resulting strip turns onto his little finger into a tube.
This is in order to plump she sat in the flute.
That's the way it sits by itself
Meanwhile, the other half wearing for the rest of the banks, in order to cut the duct and mash it.
It is desirable that even rotating the half-apex, so razvaltsevat edge.
scratched with a knife five revolutions, pierces the same knife in one place, and then dodavlivat finger.
What pliers ?????
Thumbnail (hand) zavaltsovuyu end lower compartment.
Notice the three slots in the inner cylinder!
(you can see two of them)
Well, here's the first part of the ballet marlezonskogo and over.
We gather it all in a bunch. Gently and slowly. You can grease the bottom of a little water.
Kohl four holes (they are visible) and two bukovki P from wires.
Fill fluid fireplaces,
and ignite!
Baldeem
This cup of water I boiled for 5 minutes to 15 grams of alcohol.
(but it's indoors, go further on the nature, your mother)
This is for scale
What were all sayings, but now the Tale!
Take with a super-mega-Soup!
1. Harvesting from Pat, matches, nail file from elektolobzika.
2. Soviet screwdriver with cone head.
3.Poplavok in PETe.
4.Naher I cramped concrete ????
Source:
