121
Budget foglights with their hands
How to make a fog lamp - the national recipe from Samodelkina. And it goes - cheap and cheerful.
So, take a broken headlight.
Remove the remnants of the old windows and, if possible, the old sealant.
13 ph via ru_auto
Next we are measuring the diameter of the headlights and select a suitable diameter glass jar or bottle. I went almost perfectly normal three-liter jar. I do not think at this point there can be problems - store shelves abound in any container volumes, shapes and colors!
Now, we take a glass cutter and outlines a line near the bottom of the can.
Of course it is impossible to break off the glass by incised lines, especially if you draw it in such a shitty glass cutter that was me. Therefore, at the same time do 2 things: put the kettle boiled and put a jar in the refrigerator (to rapidly cool it, I filled it with water from the well).
Take a cold jar, hot kettle and pour the boiling water into the jar.
As soon as we hear the crackle glass. Result - will fall off the bottom of the banks
As I said, I had a glass cutter at the shit, so the bottom of the split off any dick not even incised lines,
but it does not matter - Remove unnecessary projections using the same glass cutter and pliers (unfortunately the process was filmed).
Then we put in the groove of the housing fog sealant
Insert glass
Outside sealant also passes
And evenly flatten it.
That's what we've got! Left to dry
When the sealant is dry, install the finished fog in place.
Guess which side of the step-glass?
11
12
13
Source:
So, take a broken headlight.
Remove the remnants of the old windows and, if possible, the old sealant.
13 ph via ru_auto
Next we are measuring the diameter of the headlights and select a suitable diameter glass jar or bottle. I went almost perfectly normal three-liter jar. I do not think at this point there can be problems - store shelves abound in any container volumes, shapes and colors!
Now, we take a glass cutter and outlines a line near the bottom of the can.
Of course it is impossible to break off the glass by incised lines, especially if you draw it in such a shitty glass cutter that was me. Therefore, at the same time do 2 things: put the kettle boiled and put a jar in the refrigerator (to rapidly cool it, I filled it with water from the well).
Take a cold jar, hot kettle and pour the boiling water into the jar.
As soon as we hear the crackle glass. Result - will fall off the bottom of the banks
As I said, I had a glass cutter at the shit, so the bottom of the split off any dick not even incised lines,
but it does not matter - Remove unnecessary projections using the same glass cutter and pliers (unfortunately the process was filmed).
Then we put in the groove of the housing fog sealant
Insert glass
Outside sealant also passes
And evenly flatten it.
That's what we've got! Left to dry
When the sealant is dry, install the finished fog in place.
Guess which side of the step-glass?
11
12
13
Source:
