Without difficulty and a single screw I put a new mosquito net on the window

Replacing mosquito nets on the windows can cost the owners of the house a considerable amount. Changing them over time is still necessary. But there is a little trick that will allow install new nets without a single screw. Seems impossible? We have already learned how to put a mosquito net on the window, and we are ready to share this secret. Remember and use.



© Freepik How to put a mosquito net on the window Such a dashing method of replacing a mosquito net will allow you to quickly and easily install an updated version of it. To do this, you will need only a roll of mosquito net and a regular screwdriver. Mosquito nets can be found in any home goods store. And It will cost much less.than the original version. But the quality of the work done will not be inferior.

Over time, the mosquito net may break in some places or simply lose its originally elastic shape. This will open the way for all the insects in the area to your windows. So take the roll of the new grid, the screwdriver, and start acting. Mosquitoes are now booked into your house.



© Freepik New mosquito net without a single screw It may seem fantastic, but to put a new mosquito net is quite possible without the use of screws. No, we don't recommend gluing it. But You definitely won't need screws.. Let me tell you why.

View this post on Instagram

A post shared by MOSCOW NETWORKS | UVA | (@moskitufa)



Look carefully at your window. Each metal-plastic window should have a seal layer. This is a material of black color, which is located on the perimeter of the window. It can be removed. Moreover, and then back to fix, too. Do not worry about the fact that you can damage the seal during the time you remove it or put it back. It also requires replacement every few years, and you can buy it from the same hardware store.



© Freepik Cut the grid and begin dismantling If you don’t know the size of your window, walk around with roulette first. Next, you need to fold the mosquito net in two layers and cut it in accordance with the obtained dimensions. Do not forget to leave 3 cm of spare tissue on each side. Just in case.

After that Move to remove the sealer from its special place. You need to carefully tuck it with a screwdriver and then pull it out with your hands. Only do it slowly so as not to stretch or tear the material. If the job is done, take the cut off pieces of cloth and try on the old nets. See if it fits.



© Freepik How to put a mosquito net on the window without much difficulty The meaning of such a life hack is that sealer acts as fastener of a new mosquito net. You only need to return it back to a special groove, on top of the stretching fabric. This can be done with a screwdriver. The metal side of the screwdriver is convenient to push the seal at the corners, and the rubber - along the perimeter of the window.

If you do everything right, The installation of a homemade mosquito net will take no more than half an hour. This is taking into account the cutting of the fabric and fitting it on the windows. So you can save a lot and get a net no worse than factory.

View this post on Instagram

A post shared by Cat window protection (@catsafety)



Pay attention! Such a mosquito net will not protect your pets from jumping down. The material is too thin, and the mounting is not suitable for such a situation. This net will protect the house from mosquitoes and other insects, but it will not support the weight of the animal. There are special grids for this. Don't neglect the safety of your little furry friend.



Try to repeat such a life hack - you will see the ease and practicality of this innovation. Now you know how to put a mosquito net on the window without screws, glue or special fasteners. And this net looks even prettier than the store. The neighbors will appreciate the work of your golden hands. And mosquitoes, too.