The principle of operation of a thermal power plant on wood pros and cons

Modern plant on the wood is a very effective and relatively inexpensive equipment, the fuels which are wood. Now this equipment is widely used in the private residential sector and a small manufacturing facility and in field conditions.The CLASSIC PRINCIPLE of Chemicam the concept of "wood" which runs a thermal power plant on wood you need to understand that as fuel, it is possible to use various materials capable of burning. At the same time, the most common and frequently used resource, the wood. You can plant on the wood buy from the big on the market range at a relatively low cost. The main unit of these types of power plants is:

• Oven.
• A special boiler.
• Turbine.

With oven there is a heating boiler in which water is or may be special for this gas. Then the water is sent via pipeline to the turbine. It rotates and with this, in a specially mounted generator is converted to electricity. The plant on the wood with his hands to make just enough and it doesn't take a lot of time and considerable financial investment.

The MAIN features of the WORKAt the plant, the water will not immediately evaporate and will always walk the path. Exhaust steam is cooled and then becomes water again and so the circle. Some disadvantage of such a scheme of mini power plants for solid fuels is high enough explosiveness. If the water that is in the loop too hot, then the boiler could not withstand and it will break pressure. To prevent this, we use modern systems and automatic valves. You can always buy the camping power station to wood, which has high rates of effectiveness and safety of quite inexpensive cost.



Also, in the standard diagram of the generator for a couple, there are some requirements to the used water. Ordinary water from the tap pour into this equipment is not recommended. Because it large amount of salts, which over time will become the main reason for the formation of plaque on the walls of boiler used in pipes and power plant that uses wood as their main fuel.

 

Such plaque has a lower thermal conductivity, which adversely affect solid-fuel power plants to buy, you can with any required operating parameters at the most reasonable cost. But now, the problems and difficulties with the formation of plaque, can quickly and easily be resolved by using specialized tools that are designed to combat the appearance of plaque. They provide an excellent opportunity, very fast and effectively cope with the formation of plaque in such equipment, which greatly simplifies the process of operation of power plants, which use as a fuel wood.VARIOUS embodiments of power PLANTS ON the WOODare very popular Now and is an inexpensive solid travel mini power station, which can be purchased from a wide range presented. Such plants are in high popularity and demand among a large number of tourists and travelers. This equipment use a special solid fuel that provides high performance, reliability and safety in operation.





The mini power station using as fuel wood, is quite successful and has long been used by equipment that can be used in various fields of human activity. Very popular, these types of power plants in summer visitors, where there can be frequent problems with power outages and in remote regions where there are no power lines. In addition, increasingly popular now acquire camping options power plants that use wood or any other solid elements. published

 

Source: madenergy.ru/stati/teplovaya-mini-ehlektrostanciya-na-drovah-svoimi-rukami.html