46
How to easily update the interior – repaint furniture
In order to change the atmosphere in your home and update the interior, it is not enough to replace curtains, lamps and rearrange furniture. The best solution to change the interior is to buy new furniture or its restoration and painting.
Coloring furniture has its own nuances, which must be observed and approached with special care, while not forgetting about the preparatory work, on which the impeccable result of painting will also depend.
For painting the surface of wooden furniture, as advised by professionals, you will need the following tools: sandpaper, paint tray, primer, paint, putty, paint tape, roller or brush, degreasing agent, gloves and respirator. In addition, varnish and a special liquid that cleans the surface of the paint and allows you to do without using sandpaper for skinning can be useful. As a means for degreasing, you should not use kerosene and gasoline solvents, as well as white spirit, because they leave a greasy film on the furniture, preventing the paint from being absorbed normally.
Before painting the furniture, it is necessary to remove the doors and fittings, and it is also necessary to remove the boxes and disassemble the main structure as much as possible. Then you need to clean the surfaces of wax, fat, layers of varnish and old paint, sand them with sandpaper. After that, the treated surfaces must be wiped with a wet cloth.
After twenty minutes, you can start putting on cracks, irregularities and other various defects, while you should make sure that the surface does not become glossy, otherwise the paint will not be able to stick to it.
Porous surfaces, for example, such as chipboard after slabling, are better primed, which will allow you to save significantly on the amount of paint used. The choice of primer depends on the paint, for example, acrylic primer will fit under acrylic paint. You can apply a primer with a roller or brush, distributing evenly with a thin layer.
After performing all the necessary preparatory work, you can start painting the furniture.
There are several basic rules that must be observed when painting.
Firstly, in the rooms where staining will be performed, there should be no high humidity.
Secondly, furniture is usually painted in two layers, while you can start directly applying the second layer only after the first one is completely dry. The paint is applied in the same direction, strictly along the fibers of the wood.
If desired, the furniture can be painted in two colors. To do this, the surfaces painted with the first color should be glued with paint tape to prevent paint of a different color from hitting them.
Restored furniture is capable of transforming any interior, and you will not have to worry about its service life, because it receives reliable protection from pests and adverse environmental effects for many years to come.
Source: yellowhome.ru
Coloring furniture has its own nuances, which must be observed and approached with special care, while not forgetting about the preparatory work, on which the impeccable result of painting will also depend.
For painting the surface of wooden furniture, as advised by professionals, you will need the following tools: sandpaper, paint tray, primer, paint, putty, paint tape, roller or brush, degreasing agent, gloves and respirator. In addition, varnish and a special liquid that cleans the surface of the paint and allows you to do without using sandpaper for skinning can be useful. As a means for degreasing, you should not use kerosene and gasoline solvents, as well as white spirit, because they leave a greasy film on the furniture, preventing the paint from being absorbed normally.
Before painting the furniture, it is necessary to remove the doors and fittings, and it is also necessary to remove the boxes and disassemble the main structure as much as possible. Then you need to clean the surfaces of wax, fat, layers of varnish and old paint, sand them with sandpaper. After that, the treated surfaces must be wiped with a wet cloth.
After twenty minutes, you can start putting on cracks, irregularities and other various defects, while you should make sure that the surface does not become glossy, otherwise the paint will not be able to stick to it.
Porous surfaces, for example, such as chipboard after slabling, are better primed, which will allow you to save significantly on the amount of paint used. The choice of primer depends on the paint, for example, acrylic primer will fit under acrylic paint. You can apply a primer with a roller or brush, distributing evenly with a thin layer.
After performing all the necessary preparatory work, you can start painting the furniture.
There are several basic rules that must be observed when painting.
Firstly, in the rooms where staining will be performed, there should be no high humidity.
Secondly, furniture is usually painted in two layers, while you can start directly applying the second layer only after the first one is completely dry. The paint is applied in the same direction, strictly along the fibers of the wood.
If desired, the furniture can be painted in two colors. To do this, the surfaces painted with the first color should be glued with paint tape to prevent paint of a different color from hitting them.
Restored furniture is capable of transforming any interior, and you will not have to worry about its service life, because it receives reliable protection from pests and adverse environmental effects for many years to come.
Source: yellowhome.ru
