How to make a rattle-sarkunan their hands

   

Since time immemorial revered the birch as a symbol of his native land. In fact, benefit from it a lot. Planted birch, it is possible to dry the moist area of the garden, birch firewood burns hot, and the bark will always find a use.


1 For making rattles-sharkunka is fine birch bark taken from birch wood (no need to peel it with a living tree). To bark was supple, it should be steam. Pour into a pan with a little water, boil, put the steamer and put the pieces of birch bark. Cover – let a few minutes stand up. Remove a piece of bark (the rest let it remain in the pan). Cut the bark into strips – stripes. Using a knife, peel stripes from the top layer first. Similarly, remove the layer from the inner side, lining the surface stripes.

2 To insignias were more elastic and resembled the skin, brush the surface with vegetable oil (both sides). Excess oil can be removed from the surface using ordinary paper napkins. Prepare six identical lucek, cutting them with scissors. Tighten the edges of each stripes to the middle, so they can better keep in shape.

3, Exactly fold the two cooked items as shown in the picture (the twisted ends towards each other).

4 Apply, slightly expanding, two elements so that they cover the ends of the first two. Due to the twists in stripes must keep each other.

5 Apply turns the remaining two stripes so that they cover the ends of the second pair. With the awl and pull up, rolled edges of the first two licek.

6 by Prying the edge of one of licek, pour a few peas inside. Instead of peas you can use, for example, and peppers, but peas louder.

7 Your sarkunan from birch bark ready. published
 












Designer: Olga Polyakova Photo: Dmitry.

P. S. And remember, only by changing their consumption — together we change the world! ©

 

Source: www.supersadovnik.ru/masterclass.aspx?id=344