Calto to crossover





... Where the infantry will not pass
and the train was not promchitsya,
there outlander red roof crawl
and nothing will happen to him ...

This is the lyrics. A dramatic part is described as follows:
"I got home from Riga on the E22 highway, my car at a speed of 80 km \ h, rebuilding after a failed overtaking skidded on: planning for about 200 meters, crash into a ditch depth of about 4-5m fish, beak into the ground, turning over 180 degrees, the rear part of the roof to the ground again and another coup, in fact flip through the hood, stood on its wheels. In the car were three of us, all fastened. No one was hurt, except for my broken thumb on his hand. »

One interesting migratory outlander we already had and also red.

Now try to pick open another piece of the red metal.

Calto to crossover



The remains of the car came to us early in the spring here in such a

Calto to crossover

Side look shorter version of its crossover

Calto to crossover

Behind it was all mashed

Calto to crossover

The front was all smashed

Calto to crossover

Now it's outlander pre-pre-coming generation
And spare parts to it to find - it's not as easy as in the ford focus ...
However, the roof found in the spring

Calto to crossover

Even with a whole skin, that's right on the dismantling of the roof sheathing removed

Calto to crossover

And the upper body is ready for transplant

Calto to crossover

On the left rear quarter all was not so easy - it only found the end of spring

Calto to crossover

...

Calto to crossover

But the TV assembly at the end brought

Calto to crossover

On the slipway outlander he climbed, the motor with broken radiators was got

Calto to crossover

If so mash gedza back - back rear passengers would feel it

Calto to crossover

Vents twisted, its shape flowed like a Dali clock

Calto to crossover

...

Calto to crossover

Rear view from above

Calto to crossover

It is clear why we are "television" is replaced completely:

Calto to crossover

The rear panel also, incidentally, is not happy

Calto to crossover

I start to understand the car to repair, cut back door

Calto to crossover

Gum:

Calto to crossover

Parse interior almost completely

Calto to crossover

Prepare a theoretical basis, this card avtorobota we Outlander

Calto to crossover

Getting jams hydraulics stretch outside

Calto to crossover

And do stretching inside

Calto to crossover

The spring strut jammed stretch

Calto to crossover

On all sides pull

Calto to crossover

Take Kudesnitsa-grinders and ottelёpyvaem entire rear left quarter of the car

Calto to crossover

We remove the cancerous tumor as a main body jam

Calto to crossover

Relief hangs above the roof crumpled body

Calto to crossover

And so the rear wheel suspension hanging in the air almost

Calto to crossover

...

Calto to crossover

...

Calto to crossover

But throwing a tumor

Calto to crossover

Chewed

Calto to crossover

Take the whole a quarter and are preparing to dock in the back

Calto to crossover

...

Calto to crossover

Throws a whole instead of a quarter cut

Calto to crossover

It adheres to the crocodiles, we catch

Calto to crossover

...

Calto to crossover

Remove the wheel suspension exhibiting the level of relative pile

Calto to crossover

Dock, check clearances, everything is bad

Calto to crossover

Hydraulic extensions are trying to expose gaps

Calto to crossover

The rattle of metal, broken rails on already shoots from the remnants of the roof

Calto to crossover

Pull accounts in more than one direction, by the way, a single rack - in the opposite direction contractible

Calto to crossover

Slowly pulling
You've got to understand that this requires us to draw with one goal - to return the roof rack in place to fit them properly then the whole roof

Calto to crossover

Stykuya quarter in the middle of the back of the

Calto to crossover

Well, something like that

Calto to crossover

Now two or three Zipper - and the roof reset

Calto to crossover

Crumpled - to scrap

Calto to crossover

Behind this kind of two-tone, it seems like we're two sides of the vehicle collected

Calto to crossover

Top - chaos

Calto to crossover

With motorists unprepared for such a gesture mentality - can injure

Calto to crossover

Quarters height just below the door -

Calto to crossover

Looks cool

Calto to crossover

Spila, the rings on them - you can learn the age of the vehicle

Calto to crossover

Cooking thrown at the donor to the bodywork

Calto to crossover

Has thrown - not sitting suit

Calto to crossover

So the driver will not be comfortable to ride - the head will rest on the roof

Calto to crossover

We correct - at the same time putting a boot lid with the disassembly

Calto to crossover

Look at zazorchiki

Calto to crossover

The same hydraulic amendments do

Calto to crossover

And now, a sketch of the car turned out, top view

Calto to crossover

Now provarkoy all seams with amplifiers
Here, for example - at the back of the left seam roof rack

Calto to crossover

Making window

Calto to crossover

Boil internal amplifier

Calto to crossover

We clean the seam, process it anticorrosive

Calto to crossover

Brew external metal

Calto to crossover

Do the same thing for the rest of the seams, stand here

Calto to crossover

Transformed into a cooked

Calto to crossover

And the result is such a picture of the body:

Calto to crossover

Now we undertake floated front

Calto to crossover

The naked eye can see where looks right spar

Calto to crossover

Tightens slightly tattered old TV

Calto to crossover

Getting to spar

Calto to crossover

Folds to spar look fatal

Calto to crossover

But we are completely removed and the spar return to an established position in accordance with the size of body

Calto to crossover

Cut the old TV in the trash

Calto to crossover

Cut the old TV in the trash

Calto to crossover

Muzzle ready

Calto to crossover

Prepare the body to paint, we clean, remove dents, welds

Calto to crossover

That left side.
Where there were these welds ???

Calto to crossover

Colorful back panel

Calto to crossover

And here it is possible to paint:

Calto to crossover

Painting the body separately

Calto to crossover

Suspended parts separately

Calto to crossover

...

Calto to crossover

That's already painted, hung doors

Calto to crossover

Start collecting body

Calto to crossover

Potolochek vkaryachivaem

Calto to crossover

Plating collect

Calto to crossover

TV, by the way, also otkrasili

Calto to crossover

Vents glue

Calto to crossover

The trunk lid in place

Calto to crossover

Putting it all on the front panel - radiators, lights, tanks, part of the grille, etc. Clips

Calto to crossover

Something like this turns salon, interior paneling on the left back of all broken - emission
Later, the owner of the car will drive up the whole cabin part of the trunk

Calto to crossover

Well washing is carried out with dry cleaning

Calto to crossover

...

Calto to crossover

Salonchik shines

Calto to crossover

...

Calto to crossover

And what result we have (so far without nameplates):

Calto to crossover

...

Calto to crossover

And nameplate

Calto to crossover

...

Calto to crossover

...

Calto to crossover

...

Calto to crossover

When replacing broken skins brought back left side of the luggage compartment - now and cabin fully assembled:

Calto to crossover

...

Calto to crossover

...

Posted in [mergetime] 1348651172 [/ mergetime]
Thank you very much for your attention !!!

Calto to crossover

Source: ">