How to adjust a poorly closing window Bashny.Net

The plastic window needs adjustment and adjustment. Over time, it begins to close poorly, there are problems with setting for ventilation.

But all these problems can be solved. And in most cases on their own, without calling the master and without changing the windows.



DepositPhotos

How to close a plastic window Repair and adjustment of plastic windows - the process is not complicated. It begins with checking the position of the door. The window flap tends to sag, changes its position relative to the frame. Checking to see if it has really gone down is very easy.





Close the sash, take a simple pencil and mark them on the corners and sides on each side. Then open the window and see how far it goes on the frame. Normally, each mark should be at a distance of 5-7 mm from the inner edge of the frame.





Prepare tools: key and hexagon, such as shown in the figure.





A little twist them adjusting mechanism, which is on the sides of the leaf. Then close the window and check, again, making marks with a pencil, whether the leaf is in place.





This adjustment mechanism helps to shift the flap left and right. Another adjustment mechanism is on the loop. It moves the flap up and down. At the bottom of the loop is a wheel, which can be adjusted by a conventional wrench. After adjustment, you should check whether the leaf has occupied the desired position, using a pencil as a marker.





After adjusting the leaf may be necessary plastic-window adjustment. It is responsible for how well the pen closes.





On the fittings of the window, on the side of the handle and on the opposite side there are claws. They look something like in the picture. That's what we need to do. Twisting so that the distance between the rubber band on the window and the claw decreases.









Also, to adjust the press, you should twist the loop using a star key. After all the procedures you need to lubricate the fittings. Ordinary engine oil will do. Drop a few drops into each hole.