How to make a washer for giving with your own hands Bashny.Net

A handcuff for giving is a very useful thing. Even if a country house has a water supply system, a street washbasin is always in demand. With it, you can rinse your face in the heat, wash your hands after working on the beds, wash the dirt off the vegetables before carrying them to the kitchen.





Handwasher made with his own hands

Like almost everything in the world, you can buy it. However, it is not difficult to do with your own hands. There are many design options: there are also the most elementary of plastic bottles with holes in the side of the lid, there are more complicated ones.

We suggest making a country washbasin using a plastic five-liter bottle and a modified connector of hoses with a valve. In addition, you will need a marker (more precisely, its body), water-resistant glue and plasticine.





Everything you need to make a sewer.

Progress of work

First of all, it is necessary to finalize the connector valve, namely, to weight it. To do that, we'll disassemble the marker, we'll only need its body. We also remove the valve from the connector and remove the rubber seal from it.



Prepare the body of the marker and the connector valve

So that the valve in the washbasin worked clearly, qualitatively blocked the water, we will lengthen it with the body of the marker, weighted with plasticine. To do this, fill the tube with plasticine balls and seal them.

Now it is necessary to insert a valve into the body of the weighted marker, "planting" it on water-resistant glue. In order for the valve to enter the tube well, it may be necessary to bite off the ledges with cutters.



Remove the ledges with cutters

So, pour some glue into the tube and insert the prepared valve. Now let him dry well.

Next, you need to build a connector into the bottle lid. We cut in it a round hole with a diameter equal to the diameter of the connector thread. Smear the thread with water-resistant glue or sealant and insert the connector into the lid with a thread inside.



Insert the connector threaded inside

Then we wind the nut of the connector from inside the lid. Let's dry properly, insert the modified valve into the connector and return the rubber seal in place.



Insert the valve into the connector

Let's do the bottle. In order to pour water into it, we cut a hole in the bottom. Take another bottle with a capacity of 1 or 1.5 liters and cut off the upper part. It will serve at the same time as a lid of the washer and a funnel when it is filled.



Let's make a sinkhole cover.

To fix our wash on a tree branch, take four segments of string or twine one and a half meters long. We tie them around the bottle's throat and create a fastening system. To keep the twine in place, it is convenient to glue a strip of tape over the fasteners.



Scotch the twine.

It remains to wind the lid with the valve on the throat of the bottle and check the work of the washbasin.


published



P.S. And remember, just changing our consumption – together we change the world!

Source: //www.7dach.ru/Eleko/kak-sdelat-rukomoynik-dlya-dachi-svoimi-rukami-107873.html