Wood long burning ovens with a water contour Bashny.Net

Currently, there are a large variety of stoves wood, coal and other fuels. Among them the most popular are designs long burning with a water circuit. They are able to quickly heat a room, thus no long needed pieces of firewood. A feature of the heating structures is the heating of large amounts of water.





Types of furnaces of long burning with water circuit

There is a heating stove with a water circuit in all different shapes, capacities and purposes. In addition to high efficiency, this design should have a modern design, which fits the interior of the house. This sets it apart from other heating furnaces of long burning, installed in the basement or boiler room, for which appearance plays a significant role.

A wood stove with a water circuit are often installed in rooms or in the kitchen, with the right choice it becomes a real decoration of the room. Look especially stylish facilities, door inserts which are made of heat-resistant glass. They may look like a kind of fireplace with natural flame in the furnace.

The heating furnace with a water circuit are:

• Metal (made of steel or cast iron).
  
  
• Brick.
  
  
• Mixed (a combination of a metal firebox and brick foundations.)
  
  

According to the method of fuel combustion furnace with a water circuit are:

• With the ordinary method of burning fuel.
  
  
• Pyrolysis or gasification.
  
  

Heating stoves that use the conventional way of burning wood, have a large firebox, where the fuel load in large quantity, and it burns for a very long time.

In gas generator designs, the fuel also burns very long. This is due to the high temperatures and lack of oxygen. Firewood start to burn slowly and emit a combustible gas that the atomizer is delivered in a separate chamber where it is burned.





Features of the stoves with water heating for home

This design is intended to solve problems with heating in buildings that require heating. Due to the fact that the water circulates actively in various heat exchange systems such as radiators can heat several rooms. As a result, heating is provided by a whole house. In addition, the use of the oven with water heating can significantly save on firewood, and the room warms up very quickly.

It is worth remembering that if in extreme cold you won't to heat the oven, then the probability of freezing of the coolant, and this can happen very quickly. And therefore if such a design is not inhabited on a permanent basis, experts suggest to add in distilled water, special additives. Thanks to them, the system will not freeze.

Working principles of wood-burning stoves with a water heating





All the heating wood burning stoves work on the same scheme: in the furnace to lay the firewood, they burned very quickly, heating it. The walls of the structure provide heat to the entire room. The room is rapidly heated, but the temperature also drops quite quickly, so you have to constantly throw firewood.

Fuel is always ignited at the bottom. The fire rises up very quickly, you also quickly burn through the wood, leaving behind only embers. To the fire is not quenched, you should constantly throw fuel.

Furnaces, water heating warm up the room not only with his hot body, but also because of the warm water passing through the heating system.





Heat exchanger, structural, water heating install inside the heater. Usually the heat exchangers are made of sheet steel. It is very popular due to the simple processing in the manufacture of the register, whose main task is to attain the highest water temperature and creating conditions for its normal circulation.

The water is heated up by the heated gases which pass through the channels tank heating. The heating furnace with a water heating tank have two. The first heats the water, and the second brings it to vapor.

Modern designs with a water heating reservoir for heating water is usually absent. They have built a special heat exchanger that heats water in unlimited quantities. Modern furnaces can be heated not only wood, but wood pellets.





The advantages of the stoves with water heating

• Available fuel. If necessary the wood can be collected at your country site.
  
  
• Small size.
  
  
• Easy operation and maintenance.
  
  
• Wood are environmentally friendly raw materials, can not cause harm to the human body. Incineration is manufactured and released into the environment minimal amount of harmful substances.
  
  
• Relative autonomy. With no electric power design with water heating will be a long time to warm the room with his fiery body.
  
  
• For the manufacture of wood-burning furnaces used materials which have a high durability. This allows the design to be very long, practically without repairs.
  
  

In addition, a design for a home can present a cooking surface, which is easy to prepare any dish. It heats up from the direct flame.

Drawbacks of the stoves with water heating

• Low efficiency. This design by its efficiency would give way to diesel and gas boilers.
  
  
• Manual control. There is no automatic setting of fuel supply and maintaining normal control of his work.
  
  

High-yielding beds in the Kurdyumov: a minimum of labor and maximum of the natural forcesof Solar heating of private homes: options and circuit device

Conclusion

Furnaces for homes with water heating is very convenient and relatively inexpensive. They are easy to operate, safe, reliable, and they look very beautiful. This design can efficiently heat any room for a long time. A large range of these ovens allows you to choose any model to your taste, given the size of your space.published

 

Author: Sergey Zavarykin

 



Source: pechi.guru/pechi/drovyanye-pechi-dlitelnogo-goreniya-s-vodyanym-konturom.html