Pellet furnaces: innovative development of the ancient “stove”

Autonomous heating of private buildings is a constant headache and continuous search of compromise for their owners: how to reconcile the irreconcilable and to make sure that it was warm in the most severe frosts, and the costs are not through the roof, and fire safety that was on the level, and service was reduced to a minimum.





A gas boiler? But with the constantly growing tariffs for connecting it cheaper to heat bills.

Coal oven? But then you have to hire a fireman.

Dutch? But it takes a lot of space.

Stove? But it is a fire hazard and does not provide temperature stability in the room .

But before you put down the choice, is to determine the requirements for the heating system.

So, ideally heating should be:

• Economical. And economical not only in terms of acquisition, connection and the cost of fuel, maintenance costs, installation, and General life.
• Offline. Heating system requiring every half hour to throw the wood, and twice a day to shovel the ash — bad system.
• Compact. Russian stove, occupying up to one third of the area of heated space — an example of a bulky heating system.
• Fast. Spend a little time to warm-up room at the start and to ensure the stability of temperature irrespective of weather conditions, it is desirable in automatic mode.
• Safe. The surface of the “stove” when the work is heated to 300-400 degrees and use it very risky for your health and for Your building.

As can be seen from the above list, the requirements are contradictory, and none of the classical methods of heating are not in compliance. This led to the creation of fundamentally new type of heating systems: pellet stoves, fuel for which is the special fuel pellets.

Widespread in the West, pellet furnace is actively gaining market share in our area. And no wonder: the raw material for pellets is essentially garbage: waste wood, bark, ... Respectively, the value of the finished granules is small, and given the low moisture content, small ash content, high calorific value and density, pellets are much superior to conventional wood. Most importantly, unlike wood that must be cut, chop and dry, the pellets are ready to use.





 

If we compare the parameters of pellet stoves requirements to perfect the system of Autonomous heating, you can see that of all the existing types of heating, they maximally correspond to them.

The cost of the pellet furnace is comparable with the cost of other high quality heating devices with equal power. Pellets have the optimum balance of calorific value and cost and have a number of advantages compared to other fuels: ease of transportation, ready to use, environmentally friendly. Best of all, unlike the “classic” fuel, the cost of pellets will only fall because of the spread of pellet stoves are developing production capacity for the production of granules, which leads to a cheapening of the finished product.

The battery life the veil of the furnace is from one day to weeks, which minimizes the effort for maintenance. Automatic control module adjusts the fuel delivery in accordance with the temperature of the air, which allows to achieve high temperature stability and unrivalled efficiency of 91-95 %.

The compactness and safety of pellet stoves allow you to place them in any room — which is confirmed by corresponding certificates of safety.





 

And the above advantages are not limited to ovens: low temperature flue gas, environmental friendliness, long life, remote monitoring — all this allows to name the heirs of the ancient “stoves” today's best independent heating systems for Your building. published

 

Source: termal-shop.ru/articles/pelletnyie-pechi-innovaczionnoe-razvitie-drevnej-%E2%80%9Cburzhujki%E2%80%9D.html