53
Bath stove with a water tank with your own hands
Solving the issue of the stove in the bath, it is necessary to decide on what material it will be made of - this is the first.
And the second is to choose whether the oven will have a water tank or not.
Today, mainly choose the second option, thereby saving fuel.
And furnaces with a tank simultaneously heat the room and heat the water for washing.
Are there any distinctive features of this design? Of course I do.
This feature divides the bath oven into two categories, where the location of the tank itself is based:
It can be installed on the stove as a constituent element of the stove. And can be installed as a separate design element. Such a tank is usually broadcast on the wall or taken out altogether from the steam room. How to make a wood stove with a water tank for the bath The easiest option is to use a structure made of metal. This is an ordinary bourgeois oven, which includes a water tank. Usually it is installed over the stone and a chimney passes through it.
That is, water heating is carried out through the wall of the stone, and through the walls of the exhaust pipe.
For more efficient use of heat, as well as complying with the requirements of fire safety, such a furnace is covered with a fire-resistant brick.
However, in the manufacture of the stove you can face difficulties that mainly depend on the welding work. This should be the work of the welder of the fifth category, because the joints between the parts of the structure are cooked qualitatively, otherwise the water leaks cannot be avoided.
The second option is a furnace with a remote tank.
This design is more complex, because it will have to be divided into two separate parts:
So, the design of this type of furnace is as follows:
An ordinary stove-stone is installed, in the furnace of which a coil made of metal pipes is mounted. The ends of the coil connect to the water tank, one end to the top pipe, the second to the bottom. Now water is poured inside the tank, which through pipes falls into the coil. Firewood is lit, and an open flame of fire begins to heat the coil. The water in it heats up and begins to rise to the upper pipe of the tank, gets inside and squeezes cold water from the lower pipe. There is a circulation of water in the system. How to make an oven with a tank of brick Of course, a brick bath oven is an ideal option to consider that the bath is made according to all canons. Experts say that it is not difficult to make it yourself, it is important to know the construction technology and accurately observe the ordinal operations of laying each brick series.
If you are facing this process for the first time, then it is worth inviting a master, because a small mistake and your furnace will work inefficiently.
There is an easy way to build this structure of brick, without inviting qualified help from the outside. It'll look like a burgundy stove.
To do this, you will have to fill the slab foundation, and after drying it, start brickwork.
The first thing is laid out furnace height of five brick masonry with a width of one brick.
Between the second and third rows is installed a bell, made in the form of a grille of metal reinforcement.
Be sure to leave a hole in the front row for the blower.
Now you will need a metal sheet at least 10 millimeters thick. It is cut exactly on the area of the structure and a hole is made in it for the chimney.
The hole is not made in the center, but near the back wall of the furnace. Immediately installed pipe for removal of carbon monoxide gases. A sheet with a pipe is mounted on a brickwork, then a metal water tank is installed on it, which is also covered with bricks.
If there is a need to build a brick oven for the bath with a water tank and a mason, then three or four rows of masonry are erected above the metal sheet, on which a metal grille is installed. And only on it you can install a water tank. All this is necessarily covered with fire-resistant bricks.
Do not forget to leave a hole in the stone compartment, which will have to be covered with a small door.
We make an oven with a pipe tank with our own hands This is the most simplified option, which will require minimal time.
Take a pipe with a diameter of 500 millimeters and a length of 1.5 meters, which is divided into two segments of 50 and 100 centimeters. A larger portion is cooked under a stone. Here they make two holes on top of each other, one at the very bottom is blown, the second slightly higher is the furnace hole. The pipe inside in the middle is covered with a metal plug, which divides the oven into a furnace and a stone. On the back side, at the level below the plug, a hole is made in the pipe. An exhaust pipe will be welded to him. Now you need to make another hole over the furnace hole. It should be above the plug. It's a hole in the stone bay. Next, the tank is prepared from a smaller part of the pipe, that is, the bottom is welded. This part is installed on top of the stove and connect the two parts with a specially prepared clamping. All right, stove and water tank ready.
P.S. And remember, just changing our consumption – together we change the world!
Join us on Facebook, VKontakte, Odnoklassniki
Source: obogreem.net/otopitel-ny-e-pribory/pechi/pech-dlya-bani-s-bakom-dlya-vody.html
And the second is to choose whether the oven will have a water tank or not.
Today, mainly choose the second option, thereby saving fuel.
And furnaces with a tank simultaneously heat the room and heat the water for washing.
Are there any distinctive features of this design? Of course I do.
This feature divides the bath oven into two categories, where the location of the tank itself is based:
It can be installed on the stove as a constituent element of the stove. And can be installed as a separate design element. Such a tank is usually broadcast on the wall or taken out altogether from the steam room. How to make a wood stove with a water tank for the bath The easiest option is to use a structure made of metal. This is an ordinary bourgeois oven, which includes a water tank. Usually it is installed over the stone and a chimney passes through it.
That is, water heating is carried out through the wall of the stone, and through the walls of the exhaust pipe.
For more efficient use of heat, as well as complying with the requirements of fire safety, such a furnace is covered with a fire-resistant brick.
However, in the manufacture of the stove you can face difficulties that mainly depend on the welding work. This should be the work of the welder of the fifth category, because the joints between the parts of the structure are cooked qualitatively, otherwise the water leaks cannot be avoided.
The second option is a furnace with a remote tank.
This design is more complex, because it will have to be divided into two separate parts:
- The first part is the oven itself.
- The second is a tank that is usually hung against the wall.
So, the design of this type of furnace is as follows:
An ordinary stove-stone is installed, in the furnace of which a coil made of metal pipes is mounted. The ends of the coil connect to the water tank, one end to the top pipe, the second to the bottom. Now water is poured inside the tank, which through pipes falls into the coil. Firewood is lit, and an open flame of fire begins to heat the coil. The water in it heats up and begins to rise to the upper pipe of the tank, gets inside and squeezes cold water from the lower pipe. There is a circulation of water in the system. How to make an oven with a tank of brick Of course, a brick bath oven is an ideal option to consider that the bath is made according to all canons. Experts say that it is not difficult to make it yourself, it is important to know the construction technology and accurately observe the ordinal operations of laying each brick series.
If you are facing this process for the first time, then it is worth inviting a master, because a small mistake and your furnace will work inefficiently.
There is an easy way to build this structure of brick, without inviting qualified help from the outside. It'll look like a burgundy stove.
To do this, you will have to fill the slab foundation, and after drying it, start brickwork.
The first thing is laid out furnace height of five brick masonry with a width of one brick.
Between the second and third rows is installed a bell, made in the form of a grille of metal reinforcement.
Be sure to leave a hole in the front row for the blower.
Now you will need a metal sheet at least 10 millimeters thick. It is cut exactly on the area of the structure and a hole is made in it for the chimney.
The hole is not made in the center, but near the back wall of the furnace. Immediately installed pipe for removal of carbon monoxide gases. A sheet with a pipe is mounted on a brickwork, then a metal water tank is installed on it, which is also covered with bricks.
If there is a need to build a brick oven for the bath with a water tank and a mason, then three or four rows of masonry are erected above the metal sheet, on which a metal grille is installed. And only on it you can install a water tank. All this is necessarily covered with fire-resistant bricks.
Do not forget to leave a hole in the stone compartment, which will have to be covered with a small door.
We make an oven with a pipe tank with our own hands This is the most simplified option, which will require minimal time.
Take a pipe with a diameter of 500 millimeters and a length of 1.5 meters, which is divided into two segments of 50 and 100 centimeters. A larger portion is cooked under a stone. Here they make two holes on top of each other, one at the very bottom is blown, the second slightly higher is the furnace hole. The pipe inside in the middle is covered with a metal plug, which divides the oven into a furnace and a stone. On the back side, at the level below the plug, a hole is made in the pipe. An exhaust pipe will be welded to him. Now you need to make another hole over the furnace hole. It should be above the plug. It's a hole in the stone bay. Next, the tank is prepared from a smaller part of the pipe, that is, the bottom is welded. This part is installed on top of the stove and connect the two parts with a specially prepared clamping. All right, stove and water tank ready.
P.S. And remember, just changing our consumption – together we change the world!
Join us on Facebook, VKontakte, Odnoklassniki
Source: obogreem.net/otopitel-ny-e-pribory/pechi/pech-dlya-bani-s-bakom-dlya-vody.html
