Aquarium with his own hands

To begin produce here is simple device of any more or less suitable for the size of the corner, then it will be clear what it is.





All you need 8 of these little corner, on one shelf threaded hole for the bolt M10 (which was at hand, I think there is a big plus or minus), on the other pair of shelf screw holes for mounting on the bar.



Somehow.



Well, that's the main feature - 4 completely (this is important) the same length with a little corner bar on both sides. The length of the bar is equal to the inside (!) The width of the future aquarium!



Yet do these prokladochek 8 - plywood + rubber, I have about 50na50mm.



And that's what this is all you need, future side windows AquaPhone grips with the help of our accommodation. The same length of bars gives us an absolute parallel glass, which is important. Truth had a little tricky to get right angles between the edges of the glass. Elbow and diagonal measurements our assistance conditional.





We put the design on the side, putting a glass, if not "playing" means the side windows, we align perfectly. Apply sealant (any aquarium, colorless IMHO better), and we lay neatly future front (rear) glass, gently press down to the sealant fills the entire joint.



A couple of hours it is already possible to turn the design and similarly paste second rear (front) window.



After another couple of hours to shoot the bars on the underside of Akashi, turn it upside down and glue itself very well dno.Opyat a couple of hours and turn over the top edge of the glue strips of glass togozhe - ribs, it will have to twist AquaPhone). The aquarium is ready, let dry until tomorrow.



Hydro in the bathroom. This aquarium 40 liters otsadnik-fry, made just 2 pieces.



But in the same way and did like this, at 140 liters, the same corner, only the bars of a different size. This made to order, so to stand, lighting and all the equipment, it is still two times cheaper than similar in a pet shop.

Tags

See also

New and interesting