Figural ceiling with his hands

The idea has prompted the brother of the wife of Zhitomir! But at the time of the work he was not, went home on leave, so do without it, but like everything turned out. Unfortunately, not all photos found, but the idea will understand. We spread on the floor around the perimeter of the foam. In this case 50 mm. envisage drawing on the image cut off.







We treat the ceiling and foam elements on both sides of the concrete-contact (special primer with sand). After drying, the surface becomes rough, providing a secure grip.
Smear the upper side of putty (any plasterboard and concrete), and pressed against the ceiling. Keeping a minute or two. The foam is lightweight and well kept. Give the day to grab.







Under the spotlights penetrate the recesses in the foam with grooves around the perimeter of the top cover gipsokrtona, it makes a hole under the lamp wires is also passed through the slot directly on the foam. Unfortunately, I can not find the photo, but on one of the pictures, you can see the outline for clarity.



After we put the plaster grid gypsum plaster mixture (in our region Rotbant use it longer retains elasticity). Along the perimeter of the same on Rotbant sadim flexible plastic area. All aligned Rotbantom.





Above are passed the finishing putty (we used Shitrok). Beautiful. Admire.





The living room is the same technique. By the way, afraid to use spotlights lamp filament (suddenly oplavitsya foam) used LED.



If someone has doubts as to whether the crack. For the third year went. Changes were observed. So, do not wind up with profiles and plasterboard, and even silent operation, no need to punch.



Source: