434
Hood for 120000r
In general, I broke the hood loader Cat908, it is plastic,
6-9mm thickness of plastic in the evening found the price - 120000r new, once said
that old impeccably renovated for the new price was too biting.
He took off his and traveled the bodywork workshops, price zaryazhale me for the repair of
8tr 18tr to that too, or I was not happy, spit on everything and decided
do myself. This is not a car - then the quality will be of secondary importance, the main restore integrity.
I read in the internet, it is the plastic bumper solder, glued fiberglass,
color and they are like new - even stronger.
But as it turned out the hood is composed of plastic, which is not soldered finally, current char from poyalnika, but I found a way out.
Can break ...
By the way the price issue:
1. Fiberglass 3m 190r
2. Glue and hardener 800r
3. Set plastic spatulas 80r
4. Two banks putties 220r
5. Gloves 30R
6. The set of skins for grinding machines 200r
7. Tape ply to tie 80r
8. Set of screws for wood 60r
Total: 1720r
The acquired experience - priceless))
There are not clear, but still
I took
piecewise sprava- small hole, did not find ((
Prepare tool
Rabott with epoxy, so the street ready rag and solvent, always handy
Not prenibrigaem protective equipment
All the pieces and pull together the ridges on the crack samorezah
ragged edges pretreated balgarkoy that the joint was smoother
More
from the inside, too, everything is contractible
The fun begins: we coat and sizing the first layers of fiberglass
an hour a couple of layers
glue prevented homemade whisk))
on the next day go to an external processing hood:
remove the covering, grind ... we put putty again grind
and so a few times until you achieve the result zhelaemgo
More
when you're ready - go for painting,
the film was in the garage, did painting chamber for 5 minutes)
first layers
Making the symbolism of the company, it is my personal initiative
Company: Avtodorstroy symbol denotes crosshairs roads
That's it:
Source:
6-9mm thickness of plastic in the evening found the price - 120000r new, once said
that old impeccably renovated for the new price was too biting.
He took off his and traveled the bodywork workshops, price zaryazhale me for the repair of
8tr 18tr to that too, or I was not happy, spit on everything and decided
do myself. This is not a car - then the quality will be of secondary importance, the main restore integrity.
I read in the internet, it is the plastic bumper solder, glued fiberglass,
color and they are like new - even stronger.
But as it turned out the hood is composed of plastic, which is not soldered finally, current char from poyalnika, but I found a way out.
Can break ...
By the way the price issue:
1. Fiberglass 3m 190r
2. Glue and hardener 800r
3. Set plastic spatulas 80r
4. Two banks putties 220r
5. Gloves 30R
6. The set of skins for grinding machines 200r
7. Tape ply to tie 80r
8. Set of screws for wood 60r
Total: 1720r
The acquired experience - priceless))
There are not clear, but still
I took
piecewise sprava- small hole, did not find ((
Prepare tool
Rabott with epoxy, so the street ready rag and solvent, always handy
Not prenibrigaem protective equipment
All the pieces and pull together the ridges on the crack samorezah
ragged edges pretreated balgarkoy that the joint was smoother
More
from the inside, too, everything is contractible
The fun begins: we coat and sizing the first layers of fiberglass
an hour a couple of layers
glue prevented homemade whisk))
on the next day go to an external processing hood:
remove the covering, grind ... we put putty again grind
and so a few times until you achieve the result zhelaemgo
More
when you're ready - go for painting,
the film was in the garage, did painting chamber for 5 minutes)
first layers
Making the symbolism of the company, it is my personal initiative
Company: Avtodorstroy symbol denotes crosshairs roads
That's it:
Source:
