472
Kiteboarding for people suffering from paralysis of the legs
I have a friend a good one, but I have received an injury lishlsya freely based on his feet.
I make him a chair for the board to ride a kite. He used to ride a vindsёrfe.
First, remove the form from the location, which will sit))
Will be 11 photos and 1 video. (source) [next]
Then pour foam (makrofleksom), it took a few bottles.
Removing the foam base, a little skins, stretch wrap in a single layer, put the glass impregnated with resin and tightens the top again stretch. After removing obtain a chair.
and here's another
The chair will be attached to the board by means of racks. A rack with pomschyu brackets.
The main stand was doing so: first, did the foam disc, which is wrapped with glass resin, stretch wrapped and vacuum bag stuffed. Back support will be made of the fins.
The edge of the chair rather clumsy, one of the reasons - the presence of Kevlar (badly treated). therefore, I took a steel cable sheathed in PVC, braid removed and glued it to the chair.
A little touch up a chair (brightest krasochki) and the bottom bracket is riveted (steel rivets F5) - tired of such rivet rivets. Together with dyed resistant to regular place).
So it looks close. Here I attached a rear Walkers and put it on dosochki. Stay tests.
it is before the start
But on the horizon rushes
Here's another photo and video
I have everything)
Source:
I make him a chair for the board to ride a kite. He used to ride a vindsёrfe.
First, remove the form from the location, which will sit))
Will be 11 photos and 1 video. (source) [next]
Then pour foam (makrofleksom), it took a few bottles.
Removing the foam base, a little skins, stretch wrap in a single layer, put the glass impregnated with resin and tightens the top again stretch. After removing obtain a chair.
and here's another
The chair will be attached to the board by means of racks. A rack with pomschyu brackets.
The main stand was doing so: first, did the foam disc, which is wrapped with glass resin, stretch wrapped and vacuum bag stuffed. Back support will be made of the fins.
The edge of the chair rather clumsy, one of the reasons - the presence of Kevlar (badly treated). therefore, I took a steel cable sheathed in PVC, braid removed and glued it to the chair.
A little touch up a chair (brightest krasochki) and the bottom bracket is riveted (steel rivets F5) - tired of such rivet rivets. Together with dyed resistant to regular place).
So it looks close. Here I attached a rear Walkers and put it on dosochki. Stay tests.
it is before the start
But on the horizon rushes
Here's another photo and video
I have everything)
Source: