130
Modular wall
I look, the theme of home-made furniture flooded. It is understandable. Gauvin paper furniture from Ikea and costs array millennial oak - is fucked!
Even more fucked up, if you are a student, you have a hut to hut nothing but walls. Money you 50 rubles a day and they go to grub, beer, cigarettes, clothes and women.
But, bitch, if you are a poor student, it does not mean that you have to live like a beggar! We have to live like a king! Well, or at least as prynts!
Generally. In the distant 2000s, I decided myself to stir up a normal wall in the living room. So much so that it would meet all my needs.
27 photo.
So. What we have. Any MS Word. It draw what you want. Looking ahead - we will build of furniture boards. Then they cost is not so expensive.
Shields standard. 80-100-1200-1500 length, width 30-40-50.
In general, it turns out a designer for adults. Fits all penny corners with screws in bulk.
All that is needed: Tape measure, ruler, pencil, screwdriver, jigsaw, drill.
And so the drawing is ready. Each element of the wall and then is drawn separately.
All terribly easy! Mode billboards on the desired segment. Cut away the extra depth. Putting the frame. Insert the inner shelf.
The doors! Here I had to take ready. They stood a little more expensive than the shield. But to make the door of the board, but still normal, you need to oooooooochen much work. And then the door starts to the humidity. Tested on a similar headset in the hallway.
Yes Yes! The hall is also a small corner of the boards.
So. Average crates bulging on the sides of the width of the bottom drawer. This to poke a hole in this column. They are way too self-made.
The modules are fastened together with screws.
Next ...
Yet.
Here I am. As it should be, thin and hairy. Student blasphemy ...
The central section. This is actually the stuff of communication which I started all muddy. This is the heart of the headset.
There must be located: laptop, router, printer, bespereboynik, stabilizers, and other electronics.
In the middle of the bottom of the central unit recess. Inside the cabinet is placed with dvdkom and receiver. Bollard also self-made, but not out of this crown.
The central unit acquires sections.
PS: The rear module closes the hole hardboard. Where needed verezayutsya hole wiring.
It's very simple, very elementary and very fast.
Source:
Even more fucked up, if you are a student, you have a hut to hut nothing but walls. Money you 50 rubles a day and they go to grub, beer, cigarettes, clothes and women.
But, bitch, if you are a poor student, it does not mean that you have to live like a beggar! We have to live like a king! Well, or at least as prynts!
Generally. In the distant 2000s, I decided myself to stir up a normal wall in the living room. So much so that it would meet all my needs.
27 photo.
So. What we have. Any MS Word. It draw what you want. Looking ahead - we will build of furniture boards. Then they cost is not so expensive.
Shields standard. 80-100-1200-1500 length, width 30-40-50.
In general, it turns out a designer for adults. Fits all penny corners with screws in bulk.
All that is needed: Tape measure, ruler, pencil, screwdriver, jigsaw, drill.
And so the drawing is ready. Each element of the wall and then is drawn separately.
All terribly easy! Mode billboards on the desired segment. Cut away the extra depth. Putting the frame. Insert the inner shelf.
The doors! Here I had to take ready. They stood a little more expensive than the shield. But to make the door of the board, but still normal, you need to oooooooochen much work. And then the door starts to the humidity. Tested on a similar headset in the hallway.
Yes Yes! The hall is also a small corner of the boards.
So. Average crates bulging on the sides of the width of the bottom drawer. This to poke a hole in this column. They are way too self-made.
The modules are fastened together with screws.
Next ...
Yet.
Here I am. As it should be, thin and hairy. Student blasphemy ...
The central section. This is actually the stuff of communication which I started all muddy. This is the heart of the headset.
There must be located: laptop, router, printer, bespereboynik, stabilizers, and other electronics.
In the middle of the bottom of the central unit recess. Inside the cabinet is placed with dvdkom and receiver. Bollard also self-made, but not out of this crown.
The central unit acquires sections.
PS: The rear module closes the hole hardboard. Where needed verezayutsya hole wiring.
It's very simple, very elementary and very fast.
Source:
