Knowledgeable roofers insulate the roof only from the outside for one amazing reason.

Roof insulation In a private home, this is an extremely important and responsible moment. It is necessary not only to protect your cozy nest from heat loss, but also from mold. Unnecessary cooling is not as bad as excessive humidity under the roof. In the long run, it can cause serious damage to your home.



It is necessary to clearly understand that no rooftop It can't be. It's like a fly in soup. Unfortunately, those who build a home themselves can often make mistakes that lead to undesirable consequences. Like the same mold. For wooden buildings, it is most undesirable. So what do you need to know so that the heater fits perfectly into its rightful place? I've got some good advice.



Million dollar advice on what to do heater From inside and outside, they know everything. But experienced masters prefer the second option is not at all from the candy. Of course, it is simpler and more comfortable. But there's another little trick. And this trick can fly homemade homemade at a penny.

When the work on insulation of the roof is performed from the inside with your own hands, then there is no way to control it. membrane. It is this membrane that collects condensate droplets on itself, as well as other excess liquid. This moisture subsequently evaporates due to a competent system of special gaps designed for ventilation.



But if you stretch this membrane too much, it will seem to slightly “bulge” forward. Such a mistake is fraught with the fact that excess condensate will remain in your pockets. ventilator. Humidity can lead to the fact that wooden structures will hit mold, and metal – rust. Before starting to insulate the roof, it is better to discuss this issue with a professional.



In order not to lose with the insulation of the roof, you need to study a lot of information about differential and their characteristics. Pay attention to the coefficients of thermal conductivity and water absorption, as well as the density of the future insulation. In addition, it will not be superfluous to assess the degree of flammability of the building material. The fire safety of the whole house depends on it.

Budget insulation includes mineral wool and glass wool. They are accessible and easy to operate. However, keep in mind that glasswork You only need to wear protective equipment (Gloves). The most common insulation is considered foam. Its price also does not bite, and the characteristics are quite good.



A more expensive insulation is extruded polystyrene foam (EPPS). Although the progenitor of this material is considered ordinary foam, but EPPS is produced by a slightly different method. Because of this, the heater is almost not afraid of any moisture. And the price is not so critical when compared to other materials.



Competent insulation of the roof In addition to the main characteristics of the insulation, you need comprehensively and their other capabilities. For example, noise insulation. In this matter, mineral wool and glass wool take precedence, since foam does not have good noise-absorbing qualities. With it, you will need to equip additional protection from loud sounds.

Carefully study the combustibility classes of heaters. You need to choose one that does not flash like a match in a critical situation. Styrofoam does worse with this than other insulation. Although everyone has a minus. For example, a small amount of moisture can accumulate between the layers of mineral wool. Choose a heater rationally, having previously received detailed consultation At a building materials store.