Many do not know that a plastic screed does not need to be cut, it can be unbuttoned, showing

Cable nylon screed, or plastic clamping, is a simple and affordable solution to many pressing household tasks. She can help you out in an unforeseen situation, and her applications are a pond. But the one-time flexible assistant seriously spoils the overall picture. But that's only if you don't know how to unbutton it.



Cable nylon plastic clamps have earned wide popularity, as they tighten quickly and hold firmly enough. They can be used for screeding wires and cables, fixing pipes or slats, and in many other cases.



It happens that the part fixed with screeds needs to be removed or replaced. In this case, we usually cut the old clamps. But to attach after this detail in place, the clamps may no longer be found. And run to the store for new ones for a long time. Not that it's open. What do you do in this situation?

511393

Let's try to learn how to remove clamps without cutting or damaging. It's not as difficult as it might seem at first. You will need only a flat slate screwdriver with a narrow tip and a little patience.



Look at the locking mechanism of the screed. In it you can see a flat tongue, which rests on a plastic ladder and does not allow the lock to open.



Now move the free tail of the clamp upwards to open the clamp. Try to insert the tip of the screwdriver between the tongue and the screed.



When this is done, it remains only to pull, and the clamps will open. It can then be safely used again. True, the masters are advised not to get too carried away: over time, the tongue of the crest is still slightly damaged and will not hold the load so well. By the way, earlier we told how to protect the drainage system of the house from fallen leaves and snow with the help of screeds.