Expensive chainsaw began to crooked sawing, rushed to a familiar master to eliminate the problem

Chainsaw significantly facilitates the process of work on rolling trees and sawing anything. Unscrupulous use of a chainsaw can deprive a person of a good tool. But the cause of the malfunction or the fact that the saw leads to the side may indicate other problems. Today, the editors will try to understand why the saw is taken aside and why it is crooked.



While working with a chainsaw, it is necessary to hold the tool in the straight direction. The chainsaw is not an easy tool, and if the sawman does not have enough strength to hold it, the saw will be taken aside during work. Then the fuel consumption increases, and this is the reason for increasing the trajectory of the saw through the sawed material. Because of this, the tire wears out and the load on the star increases, the productivity of the tool decreases.



The chainsaw saws curved for several reasons: sharpening of the teeth can be uneven, the chain of the saw is not tightened or it does not correspond to the pitch of the saw. Sometimes, the cord just wears out. If you do not timely attach importance to the curved sawed object, you will soon have to repair the saw engine.



The first thing to do is check the chain. The reason for the curve sawing may be uneven sharpening of the teeth. Each tooth should be worn at the same distance as the previous one. When the distance is different, there is an imbalance, and the saw is pulled aside during sawing.



peels.com You should also check the chain tension. It should be pulled so that you can see the three teeth of the chainsaw. Sometimes the chain wears out on one side. Then you just have to take it off and change sides. If it is worn on both sides or does not match the other parts of the saw, then the entire tool wears out quickly.



Peels.com The tire wears out faster than the tire, but it must be replaced. When one tire wears 3 chains, it is time to replace it. Sometimes it is not easy to detect tire wear. In order to understand whether it is necessary to change the tire, it must be checked with the help of a quarry. On a flat surface, you need to put a tire and put a quarry to it.



Beginners better train to sharpen teeth with sandpaper. Every 15 hours of sawing should sharpen the teeth of the saw. And every two months take the tool to the workshop, where it will do a professional. You can sharpen the teeth of the saw with a file, but there is a rule. Each tooth should be sharpened the same number of times. Otherwise, the sharpening will be uneven. Sometimes the owner of the saw just does not notice how he finds a saw on a hard object, and the teeth are simply washed.



peels.com If the top and bottom of the tire touches the walls of the coal mine, then it should not be changed. If you find a cut curve, you need to diagnose teeth, chains, tires. You can never buy a saw headset without knowing the exact size. If you do not know how the mechanism works, it is better not to disassemble the saw yourself.