Here’s what you need to know before deciding to install a filler floor. 12 ideas and tips from an experienced designer!

It is believed that flooring In the apartment, that's not the most important thing. After all, its task is rather to shade other elements of the interior: walls, furniture, ceiling stucco. In other words, the design of the floor in the apartment depends on many factors.

And I, as an interior designer with more than 10 years of experience, thought so too, until I saw and experienced the application of technology. filler. With their help, you can walk along the sea coast, even without leaving home, or wander along forest paths. It all depends on your imagination and preferences! In addition, this floor finish has a number of advantages.

The filling floor in the apartment 3D-floor is a universal coating without seams, which consists of three layers (base layer, picture and finish layer) and is characterized by strength, wear resistance, immunity to moisture and temperature changes.

Editorial "Site" I have prepared for you 12 ideas and tips for the design of premises with the help of three-dimensional. When you see this design, you will realize that this is exactly what you dreamed of!

1. A significant advantage of liquid flooring is resistance to ultraviolet radiation and the effects of aggressive components. Often, modern housewives for cleaning use various substances with strong compositions. Exposure to aggressive components can lead to loss of external surface qualities. But if there are filling floors in the bathroom or kitchen, such problems will not affect you.
   
   
   
   
   
   
2. Filling floors are just perfect for decorating the kitchen, where the operating conditions are very difficult. Do not forget about the decorative characteristics of polymer coatings, which make them the main kitchen-piece. Personally, I love this design: I can’t believe my eyes!
   
   2977000
   
   
   
   
3. Bring to the interior of the bathroom notes of “freshness” will help coating with a three-dimensional image of green grass.
   
   
   
   
4. So that the surface is not cold, the masters are advised to combine it with the technology of “warm floor”. It is relatively new, but is already widely used in repairs. In this case, the surface of the glossy or matte floor will never be cold, and the bathroom will set the optimal temperature.
   
   
   
   
   
   
5. Do you want to make your kitchen truly original? Filling floors with the image of a pond with fish surrounded by a stone bank will help you in this.
   
   
   
   
6. If you want the interior of your bedroom to fascinate and impress guests, the filling floor is exactly what you need!
   
   
   
   
7. But how to make a filling floor yourself? The first step is to prepare the base. The floor can not be leveled “in the plane”, but be sure to clean from oil and glue stains, debris, dust. Otherwise, the liquid coating will not be able to adhere to the base completely and air bubbles will remain. It is imperative to close the cracks in the old coating. This is especially true of wooden floors. If this is not done, then the entire composition will “leak” through the cracks.
   
   It is also worth considering that the liquid floor has excellent self-leveling properties, but still significant height differences will not hide. Therefore, in some cases, you will still need to perform a screed. And it is necessary to measure the humidity of the base.
   
   
   
   
   
   
8. Boiling floors can be found not only in apartments or houses. Often this technology is used in the design of restaurants, galleries and large shopping centers. Such floors always look expensive and spectacular!
   
   
   
   
9. Since filler floors are applied in two layers, between them you can place an image on special paper or decorate the base layer with acrylic and polymer paints (in the technique of airbrushing). Between the two layers of the liquid floor can be placed and pebbles, and sand, and special acrylic chips.
   
   
   
   
10. However, with complex flooring designs, especially with 3D effect, you need to be very careful. Such elegant floors create a sense of disorder, visually make the room smaller, oblige to restrained design of the rest of the interior and, most importantly, quickly get bored.
    
    
    
    
11. Filling floor has a number of advantages over more familiar coatings (linoleum, ceramic tiles...). Namely: resistance to moisture, seamlessness, immunity to ultraviolet light and chemicals, high installation speed and a wide selection of drawings, allowing you to realize any wishes. Separately, I want to note the environmental friendliness of the filling floor! After pouring, such floors do not emit harmful substances into the air, bacteria and microbes do not settle on them.
    
    
    
    
    
    
12. However, there are disadvantages: their service life is very long - this is both a plus and a minus, since a self-leveling floor (especially a floor with a bright and complex design, for example, with a 3D effect) can quickly get bored. And the polymer floor is colder than laminate or linoleum. And, of course, liquid flooring is an artificial material that not everyone likes.
    
    
    
    
    
    

In this short video you will see the whole process of turning a regular floor into a wonderful element of the interior!

about:blank

I also suggest that you familiarize yourself with 15 tricks that designers use most often to make a home stylish and spacious! The main thing is to decide on the style so that individual interior details do not spoil the overall atmosphere, but harmonize with each other and correspond to a single idea.



Would you make a floor like that in your house? I would be glad if you would share your opinion on this.

If you are impressed by these interesting designShow them to your friends! Let them appreciate them too.