How to restore wood Windows: step by step instructions

If you bought under the cottage old house with wooden Windows that look unattractive, do not rush to throw them away and buy new ones. You can own hands to restore the old frame and with the help of our tips and modern materials to turn a frog into a Princess. Restoration of wooden Windows — a laborious process. But it is much cheaper than putting new Windows. We will tell you how to restore the wooden window with his hands.





 

 

Restoration of wooden Windows with their hands. Dismantlingthe First step is dismantling. Often old private houses the window frames are simply inserted into the opening, and they can be removed with a tire iron. The main thing is to equally apply stress by moving the mount along the entire height of the window and on both sides below the window will not warp.

If you need to Unscrew the hinges, covered with paint, you can remove the paint from the screws, tapping with a hammer on the screwdriver. After that remove them will be much easier.





 

Glass must be removed. They usually hold a couple of small studs that is often hidden under the remnants of putty. To remove putty, there are special tools, but it is quite possible to do and an ordinary chisel.

Tip! Old putty will be removed easier if you warm it with a Hairdryer.





 

 How to repair old windowAfter all the glass removed, you can begin to clean and restore wood surfaces. For paint removal, you can use construction Hairdryer.





 

Or special aggressive stripper for paint. It is applied to the surface, and it destroys the paint. But when you work with it you need to be careful — it is dangerous for the skin. Be sure to use gloves.





 

Now, when the paint is removed, you can fully assess the degree of damage to the window frame. Further actions depend on what picture you will discover.





 

If the tree is rotten, the rotten wood you want to remove. Further on the circumstances: if dents are small and can be putty, start putty. Sometimes the plaster may be carried out in several stages — it depends on the degree of damage.





 

The damage of medium size, with which the filler can not cope, you can make a filler from sawdust and PVA glue.





 

Fill this mixture in the damaged areas.





 

After the glue has dried with sawdust, zashpaklyuyte any small dents that are left.





 

If the decayed area is too large for putty and filler, you have to fill it with cubes, cut to size. They should be put on the glue and — if possible — in addition to nail or fasten screws.





 

After drying, the adhesive area should be putty regular putty for wood.





 

The next stage is cleaning. The frame should be thoroughly sanded.

Pay special attention to shpaklevaniem sites.





 

 Restoration of wooden Windows. FinishBefore you start to finish, the surface should be degreased with white spirit or similar solvent. Alcohol is not suitable for it!

Then definitely primed the Windows.





 

Now the frame is ready for painting. If you are lucky and your Windows are not damaged, you can use a transparent paint.





 

Wood is a beautiful material, and wooden Windows, painted with transparent paint, look incredibly attractive. But even if you have to paint your Windows the usual opaque paint for wood, to hide the plaster and traces of repair, new Windows still can not be compared with them.





After painting the frame ready for glazing and return to its place, where it will last for many more years. Restoration of wood Windows requires considerable time and labor, but do not let that scare. The effort will return a hundredfold, because these Windows are much more environmentally friendly and attractive than modern plastic. In addition, the restoration will cost much less than buying and installing new Windows. published

P. S. And remember, only by changing their consumption — together we change the world! ©

Source: idealsad.com/restavratsiya-derevyannyih-okon/