Homemade camera from a matchbox

Today we will tell you how to make a simple pinhole camera from a matchbox. This is the easiest thing to do at home. In this article, the process of manufacturing such a camera is described in steps, so that difficulties should not arise.

We'll need it.:
- Matchbox
- 35mm film
- A little plastic from any bottle
- Any aluminum can.
- Office knife
- Empty film tank
- Isolation
- Needle.
- pencil
- Scissors
- Linea

Instructions:
You need to take photos from a tripod or with a good emphasis - the slightest movement lubricates the frame, makes it fuzzy. When photographing with a pinhole, you need to be able to determine by eye how many seconds to open the shutter, while seconds can be counted to yourself. If the day is sunny and the film is 100, open the shutter for four to five seconds, if it is cloudy for seven to eight.
The first thing you need to make a markup and cut the frame window in the inside of the box, we have it was 36 x 24 mm, but here you can do the shape arbitrarily, also some do 24 x 24 mm, who likes.
How do you rewind? So that this process can be controlled, the following is done: we cut a thin tape out of a plastic bottle and smooth it out with our fingers, so it twists. One of the edges is sharp.
Back to the matchbox. Now we need to prepare the outer part, make markings and in the center cut a rectangular hole of 8 x 5 mm. The most important detail of the camera is a correctly made hole, which is responsible for the sharpness of the frame. Be sure to paint everything in black, the fewer light areas, the better the frame will be, you also need to paint the hole with a black marker, so that the rays of the sun do not shine, hitting the metal surface.
We begin to assemble our miracle camera, we will plant an aluminum blank with a hole on the outside of the matchbox with tape, it is desirable to fix it exactly in the center so that the light beam spreads throughout the frame.
To rewind, you need to make a pen of cardboard and tighten with tape, the size of about 5 x 20 mm.
We install the film and fix the inside of the box, while not forgetting to check the work of the frame counter, if you hear clicks, you can fix everything.

Source: brainswork.ru