723
Making alcohol burner with their hands
With such creative crafts, you can easily cook a hearty meal in nature.
Cut two bottom. How do you know the height of the inner cylinder?
Fold the two halves to overlap, and a ruler to measure from the bottom to the bottom.
I came out 25 mm. Make a reservation, I do for fun of the little stove, 0, 25 l. cans.
Next. It is important to make a smooth inner cylinder.
To this end, I found initially smooth pattern desired width,
and cut without releasing pressure from two sides.
The resulting strip turns to the little finger into a tube.
This is in order to plump she sat in the flute.
That's the way it sits by itself
Meanwhile, the other half wearing for the rest of the banks, in order to cut the duct and mash it.
It is desirable that even rotating the half-apex, so razvaltsevat edge.
scratched with a knife five revolutions, pierces the same knife in one place, and then pushes a finger.
What pliers ?????
Thumbnail (hand) zavaltsovuyu end lower compartment.
Notice the three slots in the inner cylinder!
(you can see two of them)
Well, here's the first part of the ballet marlezonskogo and over.
We gather it all in a bunch. Gently and slowly. You can grease the bottom of a little water.
Kohl four holes (they are visible) and two bukovki P wire.
Fill fluid fireplaces,
and ignite!
Baldeem
This cup of water I boiled for 5 minutes to 15 grams of alcohol.
(but it's indoors, go further on the nature, your mother)
What were all sayings, but now the Tale!
Take with a super-mega-Soup!
1. Harvesting from Pat, matches, nail file from elektolobzika.
2. Soviet screwdriver with cone head.
3.Poplavok in PETe.
4.Naher me drill on concrete ????
I've looked at all sorts of devices for the protection of the stove from the wind.
Basically it is some large tin cans for which you want to take another bag, and nerga- porter.
Nah, we'll go the other way, protoptanoy old Indian path.
1. The three branches.
2.nozh (blyayayayaya, how I like it !!! how it is convenient to operate !!! lost a bolt ((
3. megadevays assembly.
4. package from some crap with a rubber band from the camera bike.
Eraser on one end put on sticks, stick average turned around 180 degrees, stuck into the ground.
Top cover with this package from some crap ...
Eptel, it's an Indian figvam !!!
(yes I know, I know, it was not the Indians this crap and cameras from tourists ...)
Then the torch took yzhe with large cans.
Refuel 40 grams of alcohol.
Run!
I looked at the cover upside down convex, and it drops condense and drip to the bottom.
Boil 450 grams of water.
With the "nose" of pairs went!
We are not looking for easy ways, we throw frozen dumplings!
and that's what I did not understand.
What features Berthelot me there)))
I will not fix, so let it be!
Bleat, my favorite multitool with a fork forgotten at home.
Okay, Right!
Another five minutes and they are ready !!!
Just krasotischscha !!!
Cut two bottom. How do you know the height of the inner cylinder?
Fold the two halves to overlap, and a ruler to measure from the bottom to the bottom.
I came out 25 mm. Make a reservation, I do for fun of the little stove, 0, 25 l. cans.
Next. It is important to make a smooth inner cylinder.
To this end, I found initially smooth pattern desired width,
and cut without releasing pressure from two sides.
The resulting strip turns to the little finger into a tube.
This is in order to plump she sat in the flute.
That's the way it sits by itself
Meanwhile, the other half wearing for the rest of the banks, in order to cut the duct and mash it.
It is desirable that even rotating the half-apex, so razvaltsevat edge.
scratched with a knife five revolutions, pierces the same knife in one place, and then pushes a finger.
What pliers ?????
Thumbnail (hand) zavaltsovuyu end lower compartment.
Notice the three slots in the inner cylinder!
(you can see two of them)
Well, here's the first part of the ballet marlezonskogo and over.
We gather it all in a bunch. Gently and slowly. You can grease the bottom of a little water.
Kohl four holes (they are visible) and two bukovki P wire.
Fill fluid fireplaces,
and ignite!
Baldeem
This cup of water I boiled for 5 minutes to 15 grams of alcohol.
(but it's indoors, go further on the nature, your mother)
What were all sayings, but now the Tale!
Take with a super-mega-Soup!
1. Harvesting from Pat, matches, nail file from elektolobzika.
2. Soviet screwdriver with cone head.
3.Poplavok in PETe.
4.Naher me drill on concrete ????
I've looked at all sorts of devices for the protection of the stove from the wind.
Basically it is some large tin cans for which you want to take another bag, and nerga- porter.
Nah, we'll go the other way, protoptanoy old Indian path.
1. The three branches.
2.nozh (blyayayayaya, how I like it !!! how it is convenient to operate !!! lost a bolt ((
3. megadevays assembly.
4. package from some crap with a rubber band from the camera bike.
Eraser on one end put on sticks, stick average turned around 180 degrees, stuck into the ground.
Top cover with this package from some crap ...
Eptel, it's an Indian figvam !!!
(yes I know, I know, it was not the Indians this crap and cameras from tourists ...)
Then the torch took yzhe with large cans.
Refuel 40 grams of alcohol.
Run!
I looked at the cover upside down convex, and it drops condense and drip to the bottom.
Boil 450 grams of water.
With the "nose" of pairs went!
We are not looking for easy ways, we throw frozen dumplings!
and that's what I did not understand.
What features Berthelot me there)))
I will not fix, so let it be!
Bleat, my favorite multitool with a fork forgotten at home.
Okay, Right!
Another five minutes and they are ready !!!
Just krasotischscha !!!
