675
How to protect your car from thieves license plates
To not be afraid that your car license plate can kidnap for ransom, I want to show you how you can protect yourself from such scams.
Solution for 100 rubles
As always all ingenious easy - just go to the nearest market or building furniture store and buy the conventional bolts with a smooth cap, plus nuts and washers. The price set in the front and rear bumper will cost you no more than a hundred rubles (not including removal and installation of bumpers).
The main problem of all the above decisions - that number or frame holds nothing inside, so it is fairly easy to pull out, "meat" of a bumper or tailgate. In this case, mount and frame number should be through by drilling (alas!) The appropriate item. However, aesthetics does not suffer - the holes will not be visible, and if it is a metal piece, the hole can be treated with anti-corrosive paste.
1. Holders of certain machines is enough to drive the car on a lift, we had to remove the rear bumper.
2. However, this has its advantages - installation bolts will not take more than 5 minutes.
3. Drill-holes in the bumper.
4. Fix the frame.
5. Set the number and bolts.
6. Put the washers and tighten the screws on the reverse side. You can install the washer of any size - even 12-14 mm will be enough to stay was not easy.
7. Install the bumper into place - ready!
Of course, stay with the car still possible - attackers can cut it out fragment of bumper grinder as happened many times with foglights Mazda3 or windscreen washer Toyota Camry. But in such a situation it would be difficult to expect a ransom - so attackers will certainly try to find a car whose owner has not defended the number of attacks.
From
Solution for 100 rubles
As always all ingenious easy - just go to the nearest market or building furniture store and buy the conventional bolts with a smooth cap, plus nuts and washers. The price set in the front and rear bumper will cost you no more than a hundred rubles (not including removal and installation of bumpers).
The main problem of all the above decisions - that number or frame holds nothing inside, so it is fairly easy to pull out, "meat" of a bumper or tailgate. In this case, mount and frame number should be through by drilling (alas!) The appropriate item. However, aesthetics does not suffer - the holes will not be visible, and if it is a metal piece, the hole can be treated with anti-corrosive paste.
1. Holders of certain machines is enough to drive the car on a lift, we had to remove the rear bumper.
2. However, this has its advantages - installation bolts will not take more than 5 minutes.
3. Drill-holes in the bumper.
4. Fix the frame.
5. Set the number and bolts.
6. Put the washers and tighten the screws on the reverse side. You can install the washer of any size - even 12-14 mm will be enough to stay was not easy.
7. Install the bumper into place - ready!
Of course, stay with the car still possible - attackers can cut it out fragment of bumper grinder as happened many times with foglights Mazda3 or windscreen washer Toyota Camry. But in such a situation it would be difficult to expect a ransom - so attackers will certainly try to find a car whose owner has not defended the number of attacks.
From
