240
Crazy hands.
Projects Oak "Cover».
33 photos
On the occasion turned up several "hooks" from an old oak cabinet decided to make a cool "cap»
Hamstrings, saw off the excess. Better to take a hacksaw, clean cut.
The result is something that way, koryavenko.
We grind the cut edges on the grinder that was not not a single dimples, scratches, very tight polished oak still. Better on the biggest turnover, look not to burn it.
Ideal exactly ... a little burnt, but he is not to be ...
Measure the diameter of the caliper, divide in half we obtain the radius with a ruler exhibit on the scribe compass our range and schyas attention to looking for a point on the surface of the "cover" so that one end of the scoring compass standing in it and the other describes a circle right on the edge of the "cover" Get the perfect center.
Schyas importantly accurately drill a hole if possible crooked then awakens all crooked, so we use the drill stanochek.
You will need this bullshit here (do not know the name) resembles a rod with self rezom at the end
Principally to tighten it accurately neperekosilo shop.
You can do several parallel
clamped in the screwdriver (drill sharpener, though in a meat grinder lishby spun)
Several calibers nazhdachki
Wrapping around our billet turn screwdriver, sharpen,
Customized by "STANDARD»
Nelezit! Sharpen more.
Most times. nezabudte about what else wakes nail, leaving a small gap.
Polishing the finest sandpaper
Taperecha slowly rasverlivaem our hole.
Each time, increasing the diameter of the drill. (Not all times are shown)
Great drill impossible - burst
All tolshe drills I have not. on very convenient wakes raztachivat little bolgarochkoy with adapter for collet or Dremel (engraver)
Snalo little larger then sand packed
Keeping it in the hands of a vice pogut damage edge
24
25
Pakupaem in the sewing shop thimble uhmykki all questions and "what the season ... ???" Answering that will be to sew the finger does not hurt to be more convincing to buy needles and thread to, may believe
All toyzhe bolgarochkoy with almazmym cutting disc do cross-propyl.
Why cross? As practice has shown it is easier to clean,
Now connects
If you loose, you can sit a little PVA glue, not in any case not from the super glue cyanoacrylate when heated light spit
31
Schaub water does not swell varnish
Source:
33 photos
On the occasion turned up several "hooks" from an old oak cabinet decided to make a cool "cap»
Hamstrings, saw off the excess. Better to take a hacksaw, clean cut.
The result is something that way, koryavenko.
We grind the cut edges on the grinder that was not not a single dimples, scratches, very tight polished oak still. Better on the biggest turnover, look not to burn it.
Ideal exactly ... a little burnt, but he is not to be ...
Measure the diameter of the caliper, divide in half we obtain the radius with a ruler exhibit on the scribe compass our range and schyas attention to looking for a point on the surface of the "cover" so that one end of the scoring compass standing in it and the other describes a circle right on the edge of the "cover" Get the perfect center.
Schyas importantly accurately drill a hole if possible crooked then awakens all crooked, so we use the drill stanochek.
You will need this bullshit here (do not know the name) resembles a rod with self rezom at the end
Principally to tighten it accurately neperekosilo shop.
You can do several parallel
clamped in the screwdriver (drill sharpener, though in a meat grinder lishby spun)
Several calibers nazhdachki
Wrapping around our billet turn screwdriver, sharpen,
Customized by "STANDARD»
Nelezit! Sharpen more.
Most times. nezabudte about what else wakes nail, leaving a small gap.
Polishing the finest sandpaper
Taperecha slowly rasverlivaem our hole.
Each time, increasing the diameter of the drill. (Not all times are shown)
Great drill impossible - burst
All tolshe drills I have not. on very convenient wakes raztachivat little bolgarochkoy with adapter for collet or Dremel (engraver)
Snalo little larger then sand packed
Keeping it in the hands of a vice pogut damage edge
24
25
Pakupaem in the sewing shop thimble uhmykki all questions and "what the season ... ???" Answering that will be to sew the finger does not hurt to be more convincing to buy needles and thread to, may believe
All toyzhe bolgarochkoy with almazmym cutting disc do cross-propyl.
Why cross? As practice has shown it is easier to clean,
Now connects
If you loose, you can sit a little PVA glue, not in any case not from the super glue cyanoacrylate when heated light spit
31
Schaub water does not swell varnish
Source:
