Print photos in the USSR (34 photos)

And So. The film finished shooting, taken when dry. We get enlarger.



probably the first time in 10 years, open lid of the suitcase.


MDA. Foam during this time to decay to state sticky lewdness :(.


Come on, scraped off and it starts to get components.


So, like everything got. To remember now how it's all going :)



What a handsome man;)



Lamp lay the same 10 years. Inside the campaign pieces of glass, distinctly heard as they hang out there. The very light matte, spiral state is not visible. Okay, cleave to good luck. Include:



To get. Lights. True as that dull. Fair Enough. For authenticity puts a photo.



Not nifiga light does not shine. Join enlarger to civilization.



Looks cool. Let's see how it will work.


Sadly. Get even dimmer. It seems misses the focal length of the lens. Experiment for the sake of trying to shine a flashlight with a twisted reflector.


The result exceeds all expectations, but keep a flashlight so not an option.


It's time to fill the film. Select the desired crop or resize (yes, cropping was not done with Photoshop and select the desired trimming frame, which limited the area of ​​exposure). At the same time put a piece of glass mat in a special pocket on the film.


Well, like nothing more interesting. Since the seal decomposed try to replace it with glamorous pink napkins.


Climbed clean enlarger and came across this.


Gosspadi, what is he old. Oh well. Scrub away the most vicious dirt, take it apart.


Energy-saving technologies, our all :). Lamp stood as a native, even get a nice light than an incandescent bulb.


Lantern way tri-mode. Time:


Two:


And three:


Well, if there is light, why not go all the Photo print process from scratch? Paper, almost new :)


Workplace young photographer. In the bathroom of course.


Trough with the developer, fixer lock.


Photo paper and the film can only work under the light of a red lantern.


Refill film, put a piece of glass in front of red Lenses enlarger, include it, choose the position of the pre-charge paper


The most crucial moment. Remove red piece of glass, count to ten. One, two ...


... Ten. The lens, gently take a piece of paper and a developer.


The picture appeared on paper, wait until it becomes quite clear. The main thing is not to overdo, and then deteriorate and will be too dark. All further into the lock.


Wait around a while, washed in a basin of clean water and hang to wrap around.


Until the liquid flows from the pictures we obtain glyantsevatel. This heater with mirrored surfaces, which makes our glossy photos.


Fasten the legs, handles, remove the mirror.


Apply a photo picture to the mirror. Packer roller, so there would be no air bubbles.


We put a mirror in place, close the cloth and is fastened on top of the special lock. Turn on the device and go to drink coffee.


Waited enough photo dry. Turn off glyantsevatel, remove the cloth and mirror. Photo of herself jumping into our hands. Smell svezheprosushennoy pictures remembered for a lifetime :)


That's all. More pictures fit in photo and proudly show your friends :)


 -

nnm.ru