Son-in-law works as a welder, he showed how to make a powerful stove from a gas cylinder

How to do it furnace From a regular tank? This question will be asked by many, as winter will be difficult. The reasons for this concern are obvious: thousands of people in Ukraine have suffered as a result of full-scale Russian military aggression. Someone lost their home and someone had to move to a new home without heating. Now you need to prepare for the cold, and a gas cylinder stove can be more convenient than ever.



Before proceeding to the analysis of such an important topic, it is worth clarifying a few points. Construction makeshift stove (Burgeons) requires certain skills to work with a welding machine. Perhaps there is an option to order a similar stove from a master or work under the supervision of an experienced welder. It'll be safer.

The second point is safety compliance. For the manufacture of stoves usually use standard gas cylinders for 50 liters. They could be. gaseousSometimes they even remain in the form of condensation. It is recommended to clean the cylinder away from potentially dangerous places. Gas from the cylinder can be released in a wasteland or in a field where it will not harm people or animals, as the wind will quickly dissipate the residue of fuel.



First, you need to remove the gearbox from the cylinder, and then open the valve. The completion of the gas release will be evidenced by the cessation of the characteristic hissing. You can drain the residues of condensate through a pipe to which the reducer was attached. Connect a small hose to it and turn the balloon over. Tilt and shake the balloon until the liquid runs out. Be sure to close the valve on the cylinder after the end of all manipulations. Reliability requires fill up And let him stand for 1 month.



Plan of work after the balloon is ready-to-make To the bourgeois, you need to carefully consider the plan of action. Some parts of the metal container will have to be cut off, and something welded. Of course, most of all, such a stove is useful in some workshops, old garages, small warehouses.

The stove from the cylinder can be made both horizontal and vertical. We will describe the approximate progress of work on the conversion of metal containers under bourgeois. You can start working with metal even when there is water inside. This is necessary to clean the cylinder of gas residues. First, you need to cut off all unnecessary protruding elements (valves, valves). Focus on the fact that in place of the former valve there will be a door, and a chimney will be located closer to the lower supports of the balloon.

To do this, you need to draw the size of the chimney. Its diameter is adjusted depending on the diameter of the long pipe, which will bring the smoke out. Yes, it will need to be bought and carried through the wall to the street, if the bourgeois will be, say, in the garage. Consider the fact that the chimney on the outside of the building must be quite high to improve traction.



Then you need to cut a place under the door where the valve was previously located. The length is 23 cm, and the width of the door is 16 cm. These are the optimal dimensions for a standard cylinder, although of course they can be adjusted individually. The carved door can be fixed to the cylinder on the links of the thick chain.

To add traction to the stove during operation, you can do simple-minded. To do this, a small piece of pipe is useful, which must be welded straight to the door of the bourgeois. It turns out that this “nose”, like a teapot, will increase the combustion, thanks to the flows of fresh air.



Overall, the stove design is ready. Of course, doing it is much more difficult than thinking about it. However, if you understand the very principle of building such a bourgeois, then the work will be easier. In addition, the top of the bourgeois itself can be used for its intended purpose. If you cook. shelfYou can even put a kettle on it and heat water or heat food in a pan. And, of course, don't forget to weld the legs to the stove.



How to make a stove with your own hands from a gas cylinder Recall once again the importance of preliminary gas cylinder preparation To make it a bourgeois thing. If you throw anything at him, the stove will not be useful. Because there will be no master, no balloon, no tools, no garage. Be careful and careful, dear reader. And if you are not confident in your abilities, then it is better not to take risks.

Masters of all trades are also advised not to forget about protective equipment. To be more inspired by such interesting alterations, you can search for thematic videos on the Internet. Or visit the pages of folk craftsmen in their social networks. We wish everyone good luck, patience and successful completion of the case.