We start preparing for the winter, figure out what to do to make the radiator work at full power.

Winter is not far off, and with it the cold. It is time to take care of the maximum insulation of the house, because winter promises to be difficult. There are a lot of things to do, but first of all you need to do the heating system. Namely, to understand what is the heat transfer of radiators and how to increase it. Turns out it's possible.



Editorial "Site" It tells you how to increase the efficiency of the radiator and make it work to the maximum.

Heat transfer radiators We will talk about different ways to increase heat transfer. Plus, they are not very expensive. Let's find out what causes can lead to a decrease in temperature in the room. We will immediately find out how to solve each of these problems.



The main and most unpleasant reason is scale and rust, which accumulates inside. There is only one solution: wash the radiator. Not only the radiator, but the entire heating system. If you live in an apartment building, this should be handled by utilities. It will not be possible to do this on its own. So organize your neighbors or go to the boss of the house. Call specialists who will drain the water and clean the system. This will help increase the heat output at times.

By the way, since you call specialists, you can also replace cast-iron radiators with bimetallic ones. They have much higher heat transfer. However, this is a time-consuming and rather costly process. So let's move on.



Reflecting screens A lot of heat goes to nowhere. To direct it into the room, use a reflector screen. It perfectly improves the efficiency of the heating system. This design is similar to the barrier between the radiator and the wall, which in this case does not take the useful heat on itself. Foamed polyethylene with foil coating is perfect for this purpose. This screen is placed behind the battery foil side in the room. The heat that used to heat the wall will now go into the room.

Do not neglect this method. Everyone who has installed these screens has not regretted this acquisition. The use of such a screen increases the temperature regime by 2-3 degrees of heat. And the energy spent on heating is reduced by an average of about 5%.



Air circulation is another important thing. Everyone knows that improving air circulation contributes to a faster heating of the room. For example, you can use a fan that is placed opposite the battery and maximally directs warm air into the room.

Another problem that prevents warm air from circulating normally is tight curtains. They close the batteries, the convection is broken. The radiator warms itself more than the room. So get rid of the curtains. The air must be free from the radiator. Then the room will be warmer.



What to think about in advance If you're just about to install a radiator, then there are a couple of things to consider. First, before installing the radiator, you need to insulate the walls behind it. If you have funds, it is better to install a steel screen immediately. It is also better to put bimetallic batteries at once, rather than cast iron ones. Secondly, take care of the installation of cranes at the entrance and exit of the radiator. Then it can be easily washed at the right time.

You may feel that this will entail additional costs. But believe me, it will save you a lot of money in the future. It is better to think through everything at the installation stage than to spend additional money and effort.



All these tips will help to save heat and heat the apartment as efficiently as possible. With their help, the heat transfer of radiators will increase by tens of percent. We also advise you to use all these tips in a complex to achieve maximum efficiency. In addition, do not forget about other ways to insulate the house inside and outside.

Also, do not forget to check the windows before the winter season. I hope this information was useful to you. Getting ready for the winter together!

Tags

See also

New and interesting