On the grille from the gas stove spoiled legs, looking for a reliable way to fix them Bashny.Net

Plate grille It plays an important role during cooking. Just imagine that for some reason it deformed. Inconveniences now at least add up, because it is simply impossible to place a pan or pan exactly. This not only threatens your safety, but also affects the cooking process. How can we fix the situation?



Why does a deformed grille interfere with the normal cooking process? The answer is very simple. For example, while cooking something in a pan, the oil will constantly drain to one side. And instead of a high-quality and homogeneously fried dish, you can get something undercooked.

Let us consider such a problem by example. cast-iron. Returning the shape to the lattice of more flexible metals is not as difficult as in this case. How to solve the problem if one or several legs fell off at once at the iron grille for the stove? Now such a grille is likely to stagger and interfere with the quiet cooking.



One of the easiest alternatives to a broken plastic or rubberized leg is a homemade one. heat-glue leg. But keep in mind that such a device will not last long. However, it can be used as a temporary replacement while full support is expected. Anything is better than nothing.



Another quick alternative could be aluminum-wireIt should just be wrapped in the place of the lost leg. Such wire should not scratch the outer covering of the plate, so do not worry. Yes, and it will live much longer than a foot of thermal glue. Although this is not the most durable option.



If there is a small magnet at hand, then you can put it in the place of a broken leg. It is also easy to fill the missing height. coinage. Protect the surface of the stove from scratch will help a piece of silicone shape for cupcakes. This material must withstand a temperature of about 230 degrees. As an experiment, you can build a special protective case for a homemade leg from such moulds.

In order for the grille not to stagger, it is necessary to choose the legs at least approximately similar replacement. Like some kind of bolt. Then you need to drill a hole in place of the broken leg and pick up suitable bolts and a puck in diameter. By the way, in order not to scratch the plate, you can choose a screw made of non-ferrous metals (copper, bronze).

An excellent option for protecting the surface of the plate from the screw cap will be a piece of aluminum sheet. Its meaning is to drill a hole in this piece and bend so that aluminum covers the bolt cap. Then nothing should be scratched. Such a structure will last long enough if you successfully perform all the manipulations.



Grille for the stove: replacement of a broken leg with their own hands Unfortunately, not everyone can wield the tool, bend aluminum sheets and drill new holes under the bolts. In this case, you should go to the hardware stores to search special legs for the grille on the stove. They are equipped with threading, which allows you to adjust the height of the new support for the remaining legs. Moreover, such a support has a tip made of heat-resistant material. You can catch two birds with one stone. Nothing will scratch and stagger.



Have you ever had to find a way out of a similar situation? Exactly how yours broke down. plate? How was the problem solved? Tell us about your experience in the comments.