How to clean an old bathtub

For me, the main sign of responsible and neat owners is an impeccably clean bathroom, because this part of the apartment is the hardest to clean.

Clean bath



Most often, it takes a whole day to clean the bathroom. It's very exhausting, but clean-room Your eye will be happy right away.

36,433



Washing the mirror and toilet is usually not very difficult, although it takes a long time. But the bathroom often needs to play well to bring it to its proper appearance. It all depends on what material it is made of.





Methods of cleaning the bath depending on the material

1. Acrylic bath
   If you are a happy owner of an acrylic bath, its cleansing will not be difficult. Usually for this type of bath, a standard means for washing dishes is enough. The most important thing is that the product is liquid or gel-like, without aggressive substances.
   
   
   
   Acrylic will not be damaged by household acids, so you can safely use vinegar or lemon juice to remove especially persistent contamination.
   
   With proper care, the acrylic bath will not be covered with lime plaque, besides, it warms up quickly and keeps the temperature well. This is the best budget bath option.
   
   
2. Steel bathtub
   These baths last much longer than acrylic ones. However, they are very difficult to repair after damage.
   
   
   
   Cleaning such a bath is very undesirable to use any sharp objects, as well as acidic means. The acid corrodes the enamel of the steel bath, making it unsuitable for further use.
   
   The main tip for caring for a steel bath is to keep it dry between use. Therefore, it is necessary to repair all faulty cranes that leak.
   
   
3. Cast-iron bath
   Such a bath is also desirable to keep dry, because even a small amount of water left on the bottom for a long time, will create spots.
   
   
   
   It is best to always have a special cloth on hand, with which you will wipe the bath immediately after use.
   
   

Clean bathroom. First of all, you need to maintain your species. Under this condition, cleaning will cease to be long and tiring.





But here are some recipes for especially neglected cases to restore the original whiteness of the bath.

1. Method No. 1
   Fill the bath with warm water and solve the water bag of citric acid. You can use a glass of vinegar instead of acid. Leave the water in the bath for three hours, then dry it with a soft cloth.
   
   
   
   
2. Method 2
   In this case, the bath should be filled with cold water. Pour a bottle of White into the water and leave it overnight. In the morning, you will get not only a snow-white, but also a perfectly disinfected bath.
   
   
   
   
3. Method No. 3
   This is one of the toughest methods, so be sure to make sure that the bath material is strong enough before using this tool. In order to prepare a cleansing mixture, it is necessary to mix 2 tbsp. l. ash and 2 tbsp. l. drinking soda. Add some water and apply the mixture to a wet bath.

Editorial BoardMold can be removed with chlorine. Just apply the solution to the most problematic places. If you are worried about the integrity of the surface, you can replace chlorine with a more gentle solution of tea tree oil and water.