Tamper for soil compaction and petrol shvonarezchiki from "the"

Often the soil compaction is conducted to ensure the strength and durability of the future road surface. This process does not change the physico-chemical properties of soil, changes occur artificially due to the mutual movement of the particles.

To prepare the soil for construction works, its alignment and sealing, use a ramming technique.

The rammers soil


Tamper is a small device belonging to the category construction equipment used on loose soils, such as sand, gravel, stones and others for their seal. The effect occurs due to the periodic kicks "Shoe" — the impact of the platform on the surface of the soil. With this technology, it is easy to work on inaccessible areas. Useful for ramming the narrow walkways, trenches, bottom of strip foundations.

When choosing rammers need to determine the type of installed engine:
  • Electric plate compactor operates with a maximum frequency of 600 revolutions per minute, produces no harmful emissions, can be used indoors, it requires the presence of mains voltage of 220 or 380 V;
  • Petrol tamper for soil compaction more powerful than electric, and its maximum capacity is 200 m2 per hour, the fuel used is gasoline, which eliminates the use of the device inside the premises;
  • Diesel fibranova with a capacity of 700 rpm ensures the work efficiency in the area of 250 m2.
The work of the petrol rammers is to transfer torque from the motor to the eccentric shaft. The eccentric shaft is firmly attached to the ramming plate that transmits energy to it, in turn, with the plate vibration is transferred to the treated soil.

The is a domestic company which manufactures high quality construction equipment. The website offers a good range of vibratables for soil compaction, as well as gasoline furniture at affordable prices. Knowing specifications of construction equipment, he will become a reliable assistant for any of the supplier or the superintendent.

Carver seams
При the repair of roadway and concrete surfaces are often used Carver of seams. Its use is required not only for repair of old surfaces, and cutting expansion joints.

Standard floor saw joints consists of motor (petrol or electric), driving mechanism, chassis, control system and tank.

As a rule, the Carver of seams produces deep cuts into 9-22 cm, there are models with cutting depth up to 30 cm.

Special vibration-proof handle reduces vibration effects on equipment and user to zero. Cosmetics compact and easy to use, have high movement speed. With the help of easy to perform large volumes of construction works in time.

Tags

See also

New and interesting