How to make a decorative pond of old tires. :)

Take old tires (which one finds, for tire free of charge), and then cut off the top edge of the jigsaw (easy to cut).
Digs a hole slightly larger diameter tires and put the future pond, and then align the bottom.



Take the film in two layers and placed in a tire, straightening out the form.
The edge of the film lightly dressed with overboard.



Pour the water into the pond at the same time fix our film, what would she lay as flat as possible.
Then reinforce the edge of the film and make out the ground stumbling.



The most important tire strongly not to go, even if it is just above ground level, while the rainwater to the ground does not drain into the pond.



When you're done, you can install a fountain, and I made it this way: bought at a pet store aquarium turbine and it sold for the fountain nozzles. The whole thing put together and set in a pond, and a wire embedded in the ground pre-thrusting it into the plastic hose.



Source: