3259
You can make a decorative pond of old tires.
Take the old tires (who some will find on shinomontazhke free), then cut off the top edge of the jigsaw (cut easily).
Digs a hole slightly larger diameter tires and laid next pond, then align the bottom.
Take the tape in two layers and placed in a tire, pulling in shape.
Edge of the film slightly Refill overboard.
Pour the water into the pond and at the same time, fix the film, what would she lay as straight as possible.
Then strengthen the edge of the film and make out the stone ground.
Most importantly tire strongly not to go, let it be just above ground level, while the rainwater to the ground will not drain into the pond.
When everything is ready, you can install and fountain, I made it this way: bought in a pet shop for aquarium turbine and nozzle sold it to the fountain. All this business to build and install a pond, and a wire embedded in the ground beforehand thrusting it in a plastic hose.
Digs a hole slightly larger diameter tires and laid next pond, then align the bottom.
Take the tape in two layers and placed in a tire, pulling in shape.
Edge of the film slightly Refill overboard.
Pour the water into the pond and at the same time, fix the film, what would she lay as straight as possible.
Then strengthen the edge of the film and make out the stone ground.
Most importantly tire strongly not to go, let it be just above ground level, while the rainwater to the ground will not drain into the pond.
When everything is ready, you can install and fountain, I made it this way: bought in a pet shop for aquarium turbine and nozzle sold it to the fountain. All this business to build and install a pond, and a wire embedded in the ground beforehand thrusting it in a plastic hose.
Three of the most delicious smell: the smell of hot coffee, fresh pastries and pages of the new book
Makeup Brushes