820
As we have gates at the cottage zapilivaem
Theme, inspired by the recent post "As we washed down the door to the cottage." We tried this summer, too, and washed down the gate. A couple of years ago bought the land on which the old house and the old gates, which are subject to demolition.
And if the house could still suffer another year or two, the old gate had to carry it now, as was the need to travel to the site of large-size excavator to dig a septic tank.
Before you tear down the gates, it was decided to make a new, but thoroughly. So the gallery is 31 pcs.
02 - First three square column supports for gates and wickets. Poles into the ground Meter + general raft foundation.
03 - Rostwerk reinforced reinforcement rods 4, boil all of science.
04 - The underground part of the pre-primed in order to avoid corrosion.
05 - Welding centered formwork length rods are not enough.
06
07 - Getting to fill.
08
09
10
11
12
13 - After drying, the raft foundation, gruntuem until the end of poles, grind a 0 and a hammer paint brown paint to make the "factory" look. The hinges were welded in, bought separately, inside - steel ball, photo no.
14 - The welding process itself Vorotina. Two beams at the edges, one above and one below. Then - intermediate. All together boil, made two cuts in the middle of grinder, top and bottom.
15 - In parallel with the gate built temporary fence. In the fall there will be a garage and a beautiful fence.
16 - Put the gate to the ground, thoroughly boil all seams.
17
18
19 - After the cut from above and below - the gates open.
20 - Remove, grind joints gruntuem, grind the surface and coloring.
21 - Imitation timber is fitted in place, and then reams and mounted in furniture bolted to the base with a locknut Vorotina.
22 - The same procedure with a wicket, and later painted wood.
23 - Gate Bolts are inserted into the pre-drilled hole in concrete.
24 - The gate is no lock.
25 - View from inside. (Quality - sorry).
26 - start to understand the old gates. They are about 80 years old. Stood to the same amount.
27 - The final form of the inside.
28 - The same - on the outside.
29
30
31
Posted in [mergetime] 1377088958 [/ mergetime]
I have all the kick.
Source:
And if the house could still suffer another year or two, the old gate had to carry it now, as was the need to travel to the site of large-size excavator to dig a septic tank.
Before you tear down the gates, it was decided to make a new, but thoroughly. So the gallery is 31 pcs.
02 - First three square column supports for gates and wickets. Poles into the ground Meter + general raft foundation.
03 - Rostwerk reinforced reinforcement rods 4, boil all of science.
04 - The underground part of the pre-primed in order to avoid corrosion.
05 - Welding centered formwork length rods are not enough.
06
07 - Getting to fill.
08
09
10
11
12
13 - After drying, the raft foundation, gruntuem until the end of poles, grind a 0 and a hammer paint brown paint to make the "factory" look. The hinges were welded in, bought separately, inside - steel ball, photo no.
14 - The welding process itself Vorotina. Two beams at the edges, one above and one below. Then - intermediate. All together boil, made two cuts in the middle of grinder, top and bottom.
15 - In parallel with the gate built temporary fence. In the fall there will be a garage and a beautiful fence.
16 - Put the gate to the ground, thoroughly boil all seams.
17
18
19 - After the cut from above and below - the gates open.
20 - Remove, grind joints gruntuem, grind the surface and coloring.
21 - Imitation timber is fitted in place, and then reams and mounted in furniture bolted to the base with a locknut Vorotina.
22 - The same procedure with a wicket, and later painted wood.
23 - Gate Bolts are inserted into the pre-drilled hole in concrete.
24 - The gate is no lock.
25 - View from inside. (Quality - sorry).
26 - start to understand the old gates. They are about 80 years old. Stood to the same amount.
27 - The final form of the inside.
28 - The same - on the outside.
29
30
31
Posted in [mergetime] 1377088958 [/ mergetime]
I have all the kick.
Source: