738
Home construction. Electrowaste
Continuing the theme I would also like to touch on energy supply at home and a little bit about the implementation of light and strength. Initially, he did not plan to do an electrician and was very afraid of this section, therefore, made every effort to find a quality organization to implement the necessary networks. 4 meetings were held at my house and at the end choose the most appropriate and high quality company. It was discussed the total cost of the calculation of the cost of 1 point (just want to mention that to choose not the cheapest!).
After 2 days, 2 arrived cyborg, laid a bunch of devices and began to walk around the house with an air of importance and plan. I walk behind them "tail" because considered their "supermen" (always very afraid of electrics and very carefully treated her). Here it began the most interesting :) From them went comments: "You've got to do Grooves - is optional on X UAH per meter», & quot; then the socket is too high - for their double rate & quot ;, «pulling cable in corrugated - X UAH per square meter, and metal hose - XXX UAH per square meter", "buy us an additional 3 drill because We will not be enough, "etc. I listened and listened to within 1, 5 hours the flow of information, and then sent them to the 3 letters openly and drove!
I decided to do everything myself. I will not describe the long, but read a lot of information and spoke with those. specialists. After I went to the epicenter of not particularly counting bought corrugated, metal hose, boxes, wires, outlets, switches, insulation. tape, crowns and we need tools.
I choose a place to guard and started to reduce the paved road. Each track is required to sign.
On the ceiling cables in metallic hoses, and on the brick wall - in the corrugation. On the lighting chosen wire SHVVP 3 * 1, 5, the power to scatter SHVVP 3 * 2 5. Under the oven paved SHVVP 3 * 4 (with a reserve, so calm).
Plus, I decided not to save and make each unit of sockets (2 pcs) on a separate machine. and tied a box under the lights in every room and a separate machine.
I take my route to the shield.
Route all tracks.
Installed panel and a group of machines.
To understand the photo was taken at about 8.00 am. Then I had smoked a pack of cigarettes and stocks and 1, 5 liters. bottle of mineral water :) This was the final stage of implementation of the system power supply me my home and I would like all wild connect and believe in themselves!
So, go ahead!
Photo made at 16.35. I connect all inputs, but did not even jumpers. I do not eat, just drank and smoked :) It's exciting!
I finished in 19.20, then began to methodically check the health of each outlet with a portable radio! Everything worked out!!! Wildly pleased and once again convinced that anyone is capable of anything, if it really wants !!!
Do not give up on your goals and all you get! Checked :)
Source:
After 2 days, 2 arrived cyborg, laid a bunch of devices and began to walk around the house with an air of importance and plan. I walk behind them "tail" because considered their "supermen" (always very afraid of electrics and very carefully treated her). Here it began the most interesting :) From them went comments: "You've got to do Grooves - is optional on X UAH per meter», & quot; then the socket is too high - for their double rate & quot ;, «pulling cable in corrugated - X UAH per square meter, and metal hose - XXX UAH per square meter", "buy us an additional 3 drill because We will not be enough, "etc. I listened and listened to within 1, 5 hours the flow of information, and then sent them to the 3 letters openly and drove!
I decided to do everything myself. I will not describe the long, but read a lot of information and spoke with those. specialists. After I went to the epicenter of not particularly counting bought corrugated, metal hose, boxes, wires, outlets, switches, insulation. tape, crowns and we need tools.
I choose a place to guard and started to reduce the paved road. Each track is required to sign.
On the ceiling cables in metallic hoses, and on the brick wall - in the corrugation. On the lighting chosen wire SHVVP 3 * 1, 5, the power to scatter SHVVP 3 * 2 5. Under the oven paved SHVVP 3 * 4 (with a reserve, so calm).
Plus, I decided not to save and make each unit of sockets (2 pcs) on a separate machine. and tied a box under the lights in every room and a separate machine.
I take my route to the shield.
Route all tracks.
Installed panel and a group of machines.
To understand the photo was taken at about 8.00 am. Then I had smoked a pack of cigarettes and stocks and 1, 5 liters. bottle of mineral water :) This was the final stage of implementation of the system power supply me my home and I would like all wild connect and believe in themselves!
So, go ahead!
Photo made at 16.35. I connect all inputs, but did not even jumpers. I do not eat, just drank and smoked :) It's exciting!
I finished in 19.20, then began to methodically check the health of each outlet with a portable radio! Everything worked out!!! Wildly pleased and once again convinced that anyone is capable of anything, if it really wants !!!
Do not give up on your goals and all you get! Checked :)
Source:
