Accidentally spilled liquid on the tile and admired, the pristine purity of the seams

Honestly, how long have you been cleaning? stitches? For example, I constantly forget that this part of the bathroom and kitchen should be cleaned of dirt at least sometimes. And many hostess often ignore this.

557092

The only problem is that the dirt in these places accumulates and over time the seams are harder and harder to clean. But for our skilled pens, nothing is impossible. So get armed with an old toothbrush. We need it today!

Staining the tile, whether it is the kitchen or bathroom, is very easy. It is much more difficult to wash it to shine, especially when it comes to seams between tiles. Dirt in these places accumulates very quickly. However, experienced housewives know that nothing is impossible in cleaning.

To wash the seams between the tiles on the floor, many different means can be used. The easiest way is to use the usual dishwashing. Simply apply a small amount of household chemicals to an old toothbrush and start cleaning all contaminated areas with it. The result will please you in a few minutes.



But dirt is half the trouble. It happens that the grout is covered with fungus. As a rule, it consists of cement or epoxy resin, because it is very unstable to moisture. Over time, it accumulates in the seams, and mold is formed.

Mold not only looks ugly at the seams between the tiles, but also harms health. Therefore, if you notice a black plaque on the tile, you need to clean it immediately. Here comes to the rescue all sorts of special household chemicals, but in the house everyone has funds that are much safer to use.



Products containing chlorine best cope with fungal contamination. However, most often they are weathered for a long time. Remember that you must work with chlorine in a protective mask and gloves. And after working with chemicals, you need to wash yourself well with clean water. Also, chlorine is not suitable if the grout between the tiles was not originally white.

In addition, peroxide can be used for light grout. In the initial stages, you can take ammonia, which has a disinfecting effect. It should be diluted with water in a ratio of 1: 1. Apply the solution with a toothbrush to the intertile space and get rid of dirt with light movements.

Ways to clean the seams between the tiles Recently I told how to use vinegar to wash the toilet bowl. And no wonder they say that this tool cleans literally everything. The seams between the tiles are no exception. It is best to spray vinegar on the tile and leave for 1 hour so that the remedy works as best as possible.



Then you need to wash the vinegar with water and dry the tiles in the bathroom. It is from the fact that in the bathroom water is always on the tile and rarely this tile has time to dry, mold and lime form on it.

The grout can also be cleaned with citric acid. It needs to be mixed with water to make gruel. Next, this mixture should be applied to the seams and left for at least 5 minutes. And then just wipe all the seams with a toothbrush and wipe them dry.



A similar paste can be made from household soap and baking soda. Just rub some soap and mix it with hot water to make it dissolve. Then add soda to the solution and with the help of the resulting sweep all the seams in the bathroom or kitchen. If you want, you can add to this mixture a little essential oil with a pleasant fresh smell. Then your rooms will smell clean.



If you need to wash the seams on the kitchen apron from fat, only aggressive means can cope with this. But if the situation is not completely neglected, you can try to wash the apron. soda. Put soda on the tile. Then spray it with vinegar and leave for exposure for half an hour. Then the apron should be wiped with a wet cloth.

We hope this article was useful for you. It would be great if you shared it with your host friends. We wish you an easy cleaning!