24
Uprooted a net-rabitsa on the site and show what a nice fence replaced it.
It so happened that most people choose for a fence in the suburban area proflist, polycarbonate or net-rabica. And how to make a fence so that it is extremely inexpensive, light, does not deteriorate under the influence of precipitation, does not require care, hides the site from prying eyes and at the same time lets the light necessary for plants through?
Finding material that meets all these requirements would seem impossible. But there is a solution! We are happy to share it with our readers!
You will say that the net-rabitsa is relatively inexpensive and perfectly passes the sun's rays. But she doesn't hide from prying eyes. Plus, the cheaper ungalvanized mesh quickly rusts.
The fence from the profile list has a lot of advantages. But there are shortcomings. This is a large sail, the susceptibility of steel lags and pillars of corrosion and the rusty stains on the fence caused by it, as well as the complexity of painting the frame.
Polycarbonate is lightweight and lets in sunlight, but creaks in the wind, deforms and cracks in heat and frost.
In addition, it requires sealing at the edges, and without it passes dust and dirt inside.
Shading or facade mesh is a synthetic material that does not rot, does not rust, does not change its characteristics in any climatic conditions.
At the same time, it is easily mounted, stretches well, closes the area from prying eyes and can allow 20 to 60-70% of sunlight to pass through.
The fence from the facade grid is perhaps the most budgetary. To fence a standard plot of 6 acres together with columns will need about 10.000-15,000 rubles. And to install a fence along with driving pegs one person can quite in just a day.
As for any fence, you need to start with the installation of support racks at the edges of the site. You will need steel pipes, thick fittings or pieces of rectangular profile 3 meters long. In order to avoid sagging the canvas, install them at a distance of 2.5 meters from each other and deepen them by 1 meter into the ground.
Then connect around the perimeter 4 lines of capron twine. So that the twine does not slide, you can make twists of thick wire on columns. If the width of the web grid is 4 meters, then it can be folded in half and cover the entire structure, skipping the columns between the layers.
The lower edges of the canvas are sewn with a capron cord or a thin wire. You can additionally fix the grid with wire on the poles. Plastic screeds are also used, but to make them last longer, it is better to choose weatherproof ones.
The fence from the shaded mesh perfectly passes air. Depending on the degree of shading, the grid (40, 55, 80%) reduces the average temperature and provides the desired microclimate for plants growing around.
The green grid merges with the foliage and fits perfectly into the surrounding landscape. If you already have a fence of a slave net, it can be covered with a net and thus made impervious to other people's eyes.
Modern synthetic grids serve before they start to burn out, at least 5-7 years. After that, they can easily be replaced with new ones. And the used canvas, which is very pleasant, can be further used to solve a variety of dacha tasks: shade the soil, cover the terraces, shelter debris from the wind.
The disadvantages of the material include low vandal resistance. But, firstly, if desired, even a fence made of a thin profile sheet is easily damaged, for example, with a tin knife. And secondly, the low strength of the mesh is more than compensated for by excellent repairability.
As they say, think for yourself, decide for yourself whether to use or not a shading net in your suburban area. But we think that this multifunctional material deserves attention.
Finding material that meets all these requirements would seem impossible. But there is a solution! We are happy to share it with our readers!
You will say that the net-rabitsa is relatively inexpensive and perfectly passes the sun's rays. But she doesn't hide from prying eyes. Plus, the cheaper ungalvanized mesh quickly rusts.
The fence from the profile list has a lot of advantages. But there are shortcomings. This is a large sail, the susceptibility of steel lags and pillars of corrosion and the rusty stains on the fence caused by it, as well as the complexity of painting the frame.
Polycarbonate is lightweight and lets in sunlight, but creaks in the wind, deforms and cracks in heat and frost.
In addition, it requires sealing at the edges, and without it passes dust and dirt inside.
Shading or facade mesh is a synthetic material that does not rot, does not rust, does not change its characteristics in any climatic conditions.
At the same time, it is easily mounted, stretches well, closes the area from prying eyes and can allow 20 to 60-70% of sunlight to pass through.
The fence from the facade grid is perhaps the most budgetary. To fence a standard plot of 6 acres together with columns will need about 10.000-15,000 rubles. And to install a fence along with driving pegs one person can quite in just a day.
As for any fence, you need to start with the installation of support racks at the edges of the site. You will need steel pipes, thick fittings or pieces of rectangular profile 3 meters long. In order to avoid sagging the canvas, install them at a distance of 2.5 meters from each other and deepen them by 1 meter into the ground.
Then connect around the perimeter 4 lines of capron twine. So that the twine does not slide, you can make twists of thick wire on columns. If the width of the web grid is 4 meters, then it can be folded in half and cover the entire structure, skipping the columns between the layers.
The lower edges of the canvas are sewn with a capron cord or a thin wire. You can additionally fix the grid with wire on the poles. Plastic screeds are also used, but to make them last longer, it is better to choose weatherproof ones.
The fence from the shaded mesh perfectly passes air. Depending on the degree of shading, the grid (40, 55, 80%) reduces the average temperature and provides the desired microclimate for plants growing around.
The green grid merges with the foliage and fits perfectly into the surrounding landscape. If you already have a fence of a slave net, it can be covered with a net and thus made impervious to other people's eyes.
Modern synthetic grids serve before they start to burn out, at least 5-7 years. After that, they can easily be replaced with new ones. And the used canvas, which is very pleasant, can be further used to solve a variety of dacha tasks: shade the soil, cover the terraces, shelter debris from the wind.
The disadvantages of the material include low vandal resistance. But, firstly, if desired, even a fence made of a thin profile sheet is easily damaged, for example, with a tin knife. And secondly, the low strength of the mesh is more than compensated for by excellent repairability.
As they say, think for yourself, decide for yourself whether to use or not a shading net in your suburban area. But we think that this multifunctional material deserves attention.
When to cut your hair in March to attract net cash flow
What women even in a potato bag look like queens