Air connection of electricity in the country

Electrical connection is via post by air (today it is the easiest way) through, for example, self-supporting (that has a special cable) insulated wire (SIW) or to make the reinforcement for the cable manually. For reinforcement, common wire required cross-section is attached a metal cable or wire with a cross section of 3 mm by means of special clamps intended for that purpose.

To connect electricity a country house you can use the wire type SIP-4. This is a special wire in which a conductor play a role of load-bearing rope as they are made from aluminium alloy and steel. On the basis of the required power, use the cable 16-25 mm2 cross-section. If a large distance between the house and pole exceeds 20 metres, you will need to install the intermediate post.

Twenty two million forty three thousand four hundred eighteen

For attaching the wire using a special anchoring clamps, where each core is designed your clip. If you need to make a branch from the main wire, then apply the special branch clips.

Directly to the house wire is laid on the pipe running in the wall through the through hole and inside the rustic or country home connects to the electric meter. Of course, you can connect to the electric meter outside the house, but then the weekend of his wire to put through the tube into the house. The connection of the voltage regulator and outside of the house, but you need to use to protect the electrical panel.published  

 

P. S. And remember, just changing your mind — together we change the world! ©

Source: vk.com/dacha.life?w=wall-83256656_33889