As the owners of the gas boiler can reduce gas consumption

The heating system houses provide residents warm through the use of boilers. Every manufacturer of boiler equipment means boilers of the Autonomous control system for optimum fuel utilization. Every building owner should have information about additional controls for temperature and ways of controlling the temperature of the premises, gives you the opportunity to save heat and money.





"Smart" automation allows you to change room temperature depending on the time of day or set a specific weekly intervals lowering the temperature during the absence of people. Such devices include room thermostat. This little device, which is mounted on the wall and has a temperature air sensor. A control knob or keys to set the temperature to which it is expedient to heat the room. After reaching the room the desired temperature, the thermostat gives command to cease supplying heat to the room. This can happen in several ways. If you use mounted gas boiler, then the command is transmitted via a wire connection room thermostat with the cost of the boiler, and the boiler will be turned off at room temperature.

For boilers that do not have management fees, and that solid fuel boilers, control from the room thermostat can be sent to the circulation pump and three-way valve of the storage tank. The circulation pump may stop only after the valve on the boiler tank (there may be used another pump)

Termination of heat supply to the room thermostat allows you to save 10-15% of heat, respectively, will be less consumption of gas or other fuel.

Another way to automatically control room temperature is the use of sensor outdoor temperature. The latest gas boilers the possibility of attaching this sensor to the control Board of the boiler. The boiler with the sensor will maintain a constant indoor temperature, adjusting boiler operation based on outside temperature. The savings is due to the fact that the room will not overheat, what happens when the manual control with boiler temperature. Manual control fails to provide uniform temperature. And overheating of the room by 2 degrees increases the gas consumption by 10%. This is another way of "automatic" saving money for heating.

Source: ecotown.com.ua/