Washing machine without water

Proposed to add at the cottage a little civilization and to install a washing machine even where there is no running water. Such a thing invented by those who for some reason cannot hold water or is he generally unavailable. The most common place is the cottage or a small village, where, in principle, needs a constant supply of water there. Cottage – place seasonal and in small villages it is very costly, and sometimes pointless. However, the wash still and one never been canceled due to the lack of water. But modern conditions of life and civilization implies that a thing of the past. agitator type, they were replaced by machines.

It turns out that even the washing machine can be successfully used in such conditions. It is important that this design does not depend on water pressure in the system, it is important that the liquid has reached a certain level and then relay gives a signal to the machine, and that, in turn, during the filling of the drum the water starts to wash. Thus, for a washing machine need only pressurizing pump, a tank of water, where it will pump water, and a small change inside the unit.

The principle is as follows: when the water intake in the "machine" opens the input valve, it is necessary to connect the solenoid which at the time of water intake turn on the pump. Such innovation is necessary to pump in most cars are not burned – because he will be without a certain pressure (by gravity) the water pump inside the centrifuge for too long. The programmer of the machine gives the signal to open the solenoid valve, and simultaneously turns on the solenoid of the pump and the washer is filled with water.



This whole scheme worth it. It can be used in any washing machine, the machine. First tried it in the "Vyatka" — the cheapest models of machines, but experience has shown that reliable and valid. "Vyatka", so have worked without changes and failures for about 4 years.

The second option. Put a container of water in the attic or second floor if possible, as it is necessary to create an inlet pressure of 0.5 atmospheres. Next it is necessary to consider how to fill the capacity or carry buckets or by the same pump to pump water from the well. published

Source: www.umeltsi.ru/hitrochi/3133-ctiralnaya-mashina-avtomat-bez-vodoprovoda.html