Paying for my mismanagement, the washing machine flows

A washing machine is leaking - unexpected and sad news. The owners of such a device need to think in panic how to solve this problem, what to grab, where to run. But now it's over. We have studied the issue and will now explain in detail why this is happening, whether it is possible to save the washing machine and what needs to be done.



The washing machine is leaking water from the powder receiver. It may seem that this is not the biggest problem, because the washing machine can “swim” much more seriously. But that's not exactly true. Even the smallest leak of water from the washing machine indicates that some processes are incorrect. We need to fix the situation.

Why is water leakage from a powder receiver such a serious problem? The thing is that a long flow of liquid can damage the metal insides or plastic elements of the car skin. This will spoil the appearance of the device and worsen its operation.



Look at the root of the problem Let's figure out how the powder receiver works and why it can break down. Powder receiver - the capacity of the washing machine, where you need to fill a certain amount of powder or fill the air conditioner. As soon as the washing process is started, water begins to flow into this container. She washes the detergents inside the mechanism to get clean and pleasant-smelling clothes.

Someone might say, "But this powder is sealed. I can tell! That's not exactly true. There is still a small space between the walls of the powder receiver and the machine. If there is a fault, the water will find a way out.

And it will start flowing down the side wall of the washing machine or down the front. It's not good for your stuff. After all, prolonged ingress of water on metal elements can lead to the appearance of rust.



Why the washing machine is leaking is most likely the problem is poor water quality. Water leakage through the powder receiver can begin after a long time of operation of the washing mechanism. On special channels of water supply to the powder receiver, in fact, a plaque is formed.

This plaque contributes to changing the direction of the water supply jet. If earlier the powder from the container was washed properly, then in this scenario it can linger in the powder receiver for a long time. And you have to scrape the dried breasts of detergent yourself and be angry that the clothes did not wash.



Finding a way out Ideally, the washing machine should be inspected by a qualified master. He will be able to pinpoint the cause of the problem and explain how to fix it. Moreover, some are trying to ignore the problem and get out on their own.

For example, a little tilt the washing machine back. Or do not fully close the powder receiver, so that the liquid does not get to the edge of the container, and, of course, did not spill. Remember, if a washing machine leaks, something is going wrong. And this malfunction cannot be fixed by any manipulation with changing the location of the device. You need to solve the problem or seek help from the master.



But call the master or contact a professional service, unfortunately, not everyone can. If you are confident in your abilities, you can try to disassemble the mechanism of the powder receiver yourself. You need to pull out the “powder box” of the powder receiver and remove the front plastic panel of the washing machine with a screwdriver. Of course, the top cover of the car also needs to be removed, because you have to get to the very insides.

As soon as you see the plastic base of the powder receiver, you need to disconnect the water supply tubes from it. It's easy enough to do that. Next, you need to separate the plastic compounds of the powder receiver to properly wash it from various outdated things. You can use special means to remove plaque, scale, powder residues. But with such funds you need to work very carefully. Take care of your hands, eyes, respiratory system.

After you completely clean the powder receiver, you need to let it dry. Well, after drying the joint of the powder receiver must be covered with silicone sealant. This will add strength and help get rid of the leak. Put all the details together and the problem is solved.



Such a simple, but at the same time working life hack will easily eliminate the problem of water flowing through the powder receiver. So you get rid of the excess moisture in your bathroom, and the machine will work like a clock again. We wish you good luck in your work, master of all trades!