How to check if your tyres?

Tires should be kept at the optimum pressure. This will allow you to maximize their lifespan. Moreover, the optimum tire pressure ensures smooth running car and saves gasoline. If you need to check and pump up the tires there are helpful tips that will help you with this.



Tires should be cool

You should always check the tires to the touch before you measure the pressure. This is because the higher the temperature of the tire, the more pressure in them. When tires cool, you can remove the cap from the tire valve.

Place the gauge on the tire valve After you install a pressure gauge on the tire valve, look at the evidence. If there is sound produced in air, this means that the sensor is not installed correctly. Perhaps you are not tightly nailed him, or he unevenly stood up.

Pump up the tires to optimal pressure to See what pressure is optimal for the tires of your car can be in it rukodstvo manual or on the sticker located on the door driver side. If the tire is filled with air excess, the air can be released by pressing the nail of a finger or a pen on a metal pin, which is located in the center of the valve.

For information, 320 psi is standard for most passaging vehicles with standard tires.

The pressure indicated on the tire sidewall is the maximum. To bring the pressure up to this figure should not, except that, if have to carry an extremely heavy load. Check the tread depth Optimal depth of tread depends on the type of tires that are installed on the vehicle. To check the degree of wear of the tread at home, take a 2-ruble coin. Turn it so that the head of an eagle looking down, and place a coin in the groove of the tread. If the top of the eagle is visible above the tread rubber, the tire should be replaced. If the head of an eagle a little drowned in the groove, the tyres should not be changed.

For more accurate indicator that motorists use gauge tread depth. Also, on some types of tires have a special figure — indicator of the tread wear. When the pattern becomes clear — this is a sign to the driver that it's time to change tires.

Uneven tire wear Is that the tires are worn only on the inside or outside. In this case they need to deploy, and also check the alignment in the service station. published

P. S. And remember, only by changing their consumption — together we change the world! ©

Source: abtomup.com/tips/88-v-porjadke-li-vashi-shiny.html