10 tricks that will save the sodden phone



Sometimes just a few drops of water or high humidity, so that the phone is broken or permanently ceased to work well. Undoubtedly, the best way would be to seek help from service personnel. But what if this is not possible?

We are in the Website have found for you 10 tricks first-aid cell phone, if it is wet.

< Phone to extract water as soon as possible and immediately also disable





Immediately after eject your phone from the water, remove the cover and remove the battery wipe the phone and its parts paper towels or soft cloth.





Remove the SIM-card





It should be disable and remove all peripherals such as headsets, memory cards, as well as everything that can clog the gaps, cracks and crevices in your phone (covers and protective films).





If you have at hand is a vacuum cleaner, use it to blow out the water. To remove residual moisture you need to blow out every detail of the phone for 20 minutes. The phone will need to blow on all sides, constantly turning. Do not hold the phone too close to the hose of a vacuum cleaner, or static electricity is formed, that is even worse for your phone.







Do not use a hair dryer to dry your phone even "gentle" mode. By doing so, you can blow out the moisture from the surface deeper into the phone, especially dangerous for electronic components, hidden deep within the phone. You can also melt some details of the phone.





can try dry the phone, plunging it into a bag with dry rice. Figure pulls well and It absorbs moisture, so it is likely that all the moisture from the phone and the battery is absorbed into the rice, and it will slow down corrosion. Placing the phone in rice, is to remove the cover, remove the battery and put them in the same container. Hold the phone in a package or container with rice need at least 2-3 days. This process is slow and haste here only harm. While the phone is dried, it is necessary to turn from time to time, so that the water is absorbed better.

Instead of rice You can use silica gel, , which often invest in shoes and other items in the sale, he is better than the rice absorbs moisture.

It is necessary to check the phone placed in the container with an absorbent material, each hour for the first 6 hours. If the surface has a moisture, it is necessary once again to dry it with paper towels or blow the vacuum cleaner.







Place the phone in a sunny place , that all holes completely dried out. You can put the device on absorbent cloth or paper towels , even if before it was dry vacuum cleaner or placed in a container with rice. This will help to absorb any residual moisture from the unit.







After at least 24 hours, make sure that the external mobile phone looks dry. It is necessary to check all ports, bays and slots. < If your phone is as clean and dry, you can put the battery, and try to turn it on





If the phone looks dry, but is not included , may be the fault of the discharged battery. < Put the phone on the charging does not work , then all the should try to contact the Customer Service Center






Warnings





Sometimes in stores You can find sets for resuscitation soaked cell phone. It is better to buy a just in case. If your phone is affected by the salt water, it is necessary to wipe clean water to salt crystals at least do not remain in the slot under the battery. Never Vacuum wet object. You can strike shock. It is important to dry the phone before you put it on charge. Do not subject to prolonged exposure to heat, if you do not want to separate its elements are melted. Do not heat the battery, it can leak or explode. Do not attempt to disassemble the phone completely independently. Leave it to professionals, since such experiments can cause a short circuit or poisoning harmful chemicals. wikihow Photos on the preview wikiHow


See also:
10 useful ideas to give clothes and shoes new life
What if you put down, and no one is near


via www.adme.ru/svoboda-sdelaj-sam/chto-delat-esli-vy-podavilis-a-ryadom-nikogo-net-1028560/

Tags

See also

New and interesting