Efficient and environmentally friendly heat pump Bashny.Net

The heat pump is designed for economical heating and producing hot water for domestic use in individual homes, public buildings (schools, sports halls, churches), as well as storage and other. Manufacturing facilities. Compared with traditional heating installation reduces costs by 60%.

Using the pump makes it possible to cover about 80 ... 85% of the annual energy consumption is advisable to choose a pump power which would allow it to operate with a sufficient load and efficiency for most of the time. Savings achieved by reducing the total cost of the heating system and reduce electricity consumption by the pump.




The use of heat pumps with different heat output is a fundamentally new solution to the problem of heating and allows depending on seasonality and working conditions to achieve maximum efficiency in their work. Heat pumps have a long service life before overhaul (up to 10 - 15 heating seasons) and operate in fully automatic mode. plant maintenance is seasonal and periodic technical inspection of the control mode. Payback equipment does not exceed 2 - 3 heating seasons

. The principle of
The principle of heat pump is that the low-temperature thermal energy is taken from the outdoor air.

The main working parts of the system:
Evaporator made of aluminum profile (Icestick),
compressor,
heat exchanger,
choke.
A heat exchanger thermal energy is sent to the central heating system.

Depending on the outside temperature every consumed kilowatt-hour of electricity gives 2, 5 to 5 kWh of heat energy.

Example 1. Individual house of 120 m2 of usable area and is equipped with a basement of the same area previously heated by heating oil and firewood. In terms of the cost of electricity annual consumption was about 27 000 kWh Go to the heat pump is allowed to reduce energy consumption up to 9000 kWh That is three times!

Example 2: In the south of Sweden, this system is used for space heating "Volvo" representation of an area of ​​6,000 square meters. m.

Installing
The heat pump at the time of sale completely ready for installation. Typically the device is set to 2 - 20 meters from the house. Select the most purged at the site location. Formed evaporator ice sculpture will be original decoration infield.



Advantages:
can significantly reduce heating costs
simplicity and low cost of installation (requires no excavation or drilling, suitable for any size and relief of the land, does not cool the soil surface)
does not require any special care;
Compatible with all hot water heating systems;
resistance to adverse weather conditions;
a high degree of reliability in operation;
It resembles a modern sculptural composition in the style of techno.