786
Do not spend money on heating. Insulate your home using simple improvised!
Warm the house quickly and very inexpensive! Make your own hands solar panel will heat the house directly. This type of heating demi-season, it is very well suited for spring and autumn time when warm house seriously still early, but the street is already quite cool. The first step towards self-made collector - to collect an impressive amount of aluminum cans of beer. You need plywood in order to make the cabinet, glass, foam and paint. Watch the video about how to make solar panels, make sure that it - just!
1. Prepare the first cans of beer or any other beverage. Notice that the banks should be aluminum. Check aluminum can or steel can with a magnet. Make holes in the banks, as shown in the picture. Bottom made two small holes with a nail or a drill, the top bank nadrezh scissors.
2. Well wash cans washing up liquid. Dry them outdoors.
3. Now the crucial moment - need to glue the cans. The top and bottom of a bank for each other, because it is quite easy. Silicone adhesive thermostable, so that it with a light heart can be used for the manufacture of the collector.
4. To ensure that you get exactly the solar tunnel, make a pattern out of wood, which is more convenient to glue cans. Shoot down the two boards with nails at a right angle.
5. It is easier to dry banks. See that the pattern was recorded, as the banks are completely dry.
6. You can now be taken for the frame. The box should be made of wood and aluminum, 1 mm thick. Board with a round hole for cans easy to do with a special attachment on a drill.
7. Remember that the glue dries not as fast as you think. Give glued box to dry for 24 hours.
8. Inside the box you want to apply the insulation of fiberglass or foam. Openings for air inlet and outlet should surround the insulation carefully.
9. Okras glued black paint cans and placed in the locker. These black banks - the main item, it is called a suntrap. That the banks will attract the sun and heat. Top banks close the lid of the plexiglass.
The only drawback of the design - it can not accumulate heat, which produces. Because the night cover the collector needs to be closed, so that the house did not cool down.
The last step - the thermostat sensor. If you did everything correctly, your solar panels will produce 1.2 kilowatts of power per day. It all depends on how the day will be sunny.
This invention deserves attention, it reminds us that the future is now. Rational use of natural energy - wise and inevitable solution.
Now you know how to make a solar collector. This is very useful information for anyone who has a cottage, and who is coming to its reasonable arrangement. Perhaps this idea will make your home more comfortable, warmer and more original.
Tell your friend about a simple solar collector! Our man will forbid - he even beer cans from the collider will collect.
via takprosto cc
1. Prepare the first cans of beer or any other beverage. Notice that the banks should be aluminum. Check aluminum can or steel can with a magnet. Make holes in the banks, as shown in the picture. Bottom made two small holes with a nail or a drill, the top bank nadrezh scissors.
2. Well wash cans washing up liquid. Dry them outdoors.
3. Now the crucial moment - need to glue the cans. The top and bottom of a bank for each other, because it is quite easy. Silicone adhesive thermostable, so that it with a light heart can be used for the manufacture of the collector.
4. To ensure that you get exactly the solar tunnel, make a pattern out of wood, which is more convenient to glue cans. Shoot down the two boards with nails at a right angle.
5. It is easier to dry banks. See that the pattern was recorded, as the banks are completely dry.
6. You can now be taken for the frame. The box should be made of wood and aluminum, 1 mm thick. Board with a round hole for cans easy to do with a special attachment on a drill.
7. Remember that the glue dries not as fast as you think. Give glued box to dry for 24 hours.
8. Inside the box you want to apply the insulation of fiberglass or foam. Openings for air inlet and outlet should surround the insulation carefully.
9. Okras glued black paint cans and placed in the locker. These black banks - the main item, it is called a suntrap. That the banks will attract the sun and heat. Top banks close the lid of the plexiglass.
The only drawback of the design - it can not accumulate heat, which produces. Because the night cover the collector needs to be closed, so that the house did not cool down.
The last step - the thermostat sensor. If you did everything correctly, your solar panels will produce 1.2 kilowatts of power per day. It all depends on how the day will be sunny.
This invention deserves attention, it reminds us that the future is now. Rational use of natural energy - wise and inevitable solution.
Now you know how to make a solar collector. This is very useful information for anyone who has a cottage, and who is coming to its reasonable arrangement. Perhaps this idea will make your home more comfortable, warmer and more original.
Tell your friend about a simple solar collector! Our man will forbid - he even beer cans from the collider will collect.
via takprosto cc
7 fruits that help prevent cancer. They should eat every day!
You just have to know about these side effects of aspirin. Be careful!