368
Create a steampunk medallion
Hello! Master as a hobby trinkets, I want to show you one of the last works. Familiar guys steampunk club asked the festival to make it different decorations. As the sample was chosen on a flat medallion pendants, and I'll show you how to make a
Almost all of the tools used are a real man should have in the house, well, or be able to make them yourself! Let's start.
The main topic will be the sign Biohazard - Biohazard. Material - copper. So print a revised sketch, sticking it on a copper leaf. Behind the plastic sheet stuck to kittmassoy- thing that does not bend in the thin leaf cutting. We start to cut!
It will be 15-20 photos
Continue cutting out the usual jigsaw, sawing metal.
Now the inner lumen. Drill holes, threaded nail file, and again natyagivaem- sawing, sawing ... tedious job of work, but it is necessary!
Progress, so to speak, in the face.
The intermediate stage. Peel deliberately flourish, we have the same steampunk, not Tiffany Dior
It is time to remove the sketch, it is we no longer need. Take bormashinku, stick in the workpiece in kittmassu - and otdraivaem to good copper shine.
Farther. Then cut out the copper bottom, just kruglyash with a tail. And now an important point - is enamel medallion. Stained glass, ie To do this - you need potoloch enamel. Doing it
Glue superglue (just so as not falling apart) and the bottom of the medallion. Fill with a toothpick pounded enamel. Neatly ...
Lishnee- off!
And the stove. 800gradusov, until crisp.
It turns appetizing. Along the way, you can warm up buderbrod
Ready-made pastry. Copper went dross, but caked enamel.
Repeat the procedure, put a second coat of enamel.
And now the dirtiest part - Polishing! Somewhere got enamel, it is necessary to remove copper to clean thoroughly. Getting Started!
All excess enamel is removed, trim the edges of the medallion looks like not bad
Sorry for overexposure, overdone with polished, it reflects the flash and without it it is not visible. Tail on top then bend to fit the chain. Done! You can criticize)
Source:
Almost all of the tools used are a real man should have in the house, well, or be able to make them yourself! Let's start.
The main topic will be the sign Biohazard - Biohazard. Material - copper. So print a revised sketch, sticking it on a copper leaf. Behind the plastic sheet stuck to kittmassoy- thing that does not bend in the thin leaf cutting. We start to cut!
It will be 15-20 photos
Continue cutting out the usual jigsaw, sawing metal.
Now the inner lumen. Drill holes, threaded nail file, and again natyagivaem- sawing, sawing ... tedious job of work, but it is necessary!
Progress, so to speak, in the face.
The intermediate stage. Peel deliberately flourish, we have the same steampunk, not Tiffany Dior
It is time to remove the sketch, it is we no longer need. Take bormashinku, stick in the workpiece in kittmassu - and otdraivaem to good copper shine.
Farther. Then cut out the copper bottom, just kruglyash with a tail. And now an important point - is enamel medallion. Stained glass, ie To do this - you need potoloch enamel. Doing it
Glue superglue (just so as not falling apart) and the bottom of the medallion. Fill with a toothpick pounded enamel. Neatly ...
Lishnee- off!
And the stove. 800gradusov, until crisp.
It turns appetizing. Along the way, you can warm up buderbrod
Ready-made pastry. Copper went dross, but caked enamel.
Repeat the procedure, put a second coat of enamel.
And now the dirtiest part - Polishing! Somewhere got enamel, it is necessary to remove copper to clean thoroughly. Getting Started!
All excess enamel is removed, trim the edges of the medallion looks like not bad
Sorry for overexposure, overdone with polished, it reflects the flash and without it it is not visible. Tail on top then bend to fit the chain. Done! You can criticize)
Source:
