682
On a cool drink in the country and not only
On a cool drink outside the city and netolko.
Certainly, many in the garage or in the country are older refrigerators, but not everyone knows that many of the old refrigerators can operate without electricity. The most common is the Frost 3 and SADC 2.
How to identify such refrigerators. Absorbent refrigerators easily identified by type with Zadie.
Posted in [mergetime] 1334437563 [/ mergetime]
A bit of theory.
A special feature is the absorption-type refrigerators quiet operation, lack of shut-off valves and moving parts, which increases its durability.
Performance is much lower absorption refrigerators compression, cooling process and obtain a low (negative) temperature in the absorption refrigerators is much slower and reaches a temperature much longer than in compression refrigerators.
The name of the absorption-type refrigerators have received from them what is happening in the absorption process, ie, absorption of a liquid or solid absorber refrigerant vapor generated in the evaporator. The refrigerant is ammonia. Ammonia vapors are absorbed by water to thereby form a water-ammonia solution.
So that's the whole principle of operation of this device is based on heating the solution vodnoamiachnogo electric heating element. Who is behind the protective casing surrounded by glass.
Posted in [mergetime] 1334437780 [/ mergetime]
The heating element is as follows.
The heating element at the time of use of the refrigerator without power can be removed.
Then only need imagination and straight arms.
By the point of attachment of the heating element can be attached to a heat exchanger made of copper or another metal and heat it via the oil lamp, or any other heater such as a burner or an alcohol lamp. The heating temperature in the region of 100-150 degrees is sufficient to start this device. If the refrigerator was out of operation for a long time before it runs on, it should be flipped.
ATTENTION !!!
we must remember that there is ammonia, which is really a lot and it is under pressure. system in contrast to conventional refrigerators, there from iron tubes, thus rusting before operation test for corrosion. Do not disassemble except heater. When depressurization to leave the premises - for pulmonary edema enough to breathe very little.
And you can use outdoors in fishing trips.
Absorbent refrigerators are usually compact and with their transportation is no problem.
Good luck I have everything.
Source:
Certainly, many in the garage or in the country are older refrigerators, but not everyone knows that many of the old refrigerators can operate without electricity. The most common is the Frost 3 and SADC 2.
How to identify such refrigerators. Absorbent refrigerators easily identified by type with Zadie.
Posted in [mergetime] 1334437563 [/ mergetime]
A bit of theory.
A special feature is the absorption-type refrigerators quiet operation, lack of shut-off valves and moving parts, which increases its durability.
Performance is much lower absorption refrigerators compression, cooling process and obtain a low (negative) temperature in the absorption refrigerators is much slower and reaches a temperature much longer than in compression refrigerators.
The name of the absorption-type refrigerators have received from them what is happening in the absorption process, ie, absorption of a liquid or solid absorber refrigerant vapor generated in the evaporator. The refrigerant is ammonia. Ammonia vapors are absorbed by water to thereby form a water-ammonia solution.
So that's the whole principle of operation of this device is based on heating the solution vodnoamiachnogo electric heating element. Who is behind the protective casing surrounded by glass.
Posted in [mergetime] 1334437780 [/ mergetime]
The heating element is as follows.
The heating element at the time of use of the refrigerator without power can be removed.
Then only need imagination and straight arms.
By the point of attachment of the heating element can be attached to a heat exchanger made of copper or another metal and heat it via the oil lamp, or any other heater such as a burner or an alcohol lamp. The heating temperature in the region of 100-150 degrees is sufficient to start this device. If the refrigerator was out of operation for a long time before it runs on, it should be flipped.
ATTENTION !!!
we must remember that there is ammonia, which is really a lot and it is under pressure. system in contrast to conventional refrigerators, there from iron tubes, thus rusting before operation test for corrosion. Do not disassemble except heater. When depressurization to leave the premises - for pulmonary edema enough to breathe very little.
And you can use outdoors in fishing trips.
Absorbent refrigerators are usually compact and with their transportation is no problem.
Good luck I have everything.
Source:
