427
PCA on their own.
Word for word, he asked his nephew to make something of weapons.
I fired up the idea, downloaded a number of images and set to work. The idea arose to post in the middle of the work - so the initial stage there are no photos. About the size of a seven-year customized fighter.
Material effect acquired profession - tree species - Ash!
Two
Under the hands of scrap ash fell 500 * 200 * 50mm
From it all and manufactured. I painted on a piece of cardboard about and cut the contour. Not to impose the workpiece and cut from a single piece with the butt forearm. Clutching at tisochki and began whittling "swallow", or whatever it is called.
Three
The barrel sawed apart, spaced slots and milled oberfrezerom.
He also drove the radius R 5 on the perimeter of the blank to screw the screws on tsevyu hidden under caps and kley.Tak the designated store.
All the same, the weapon will be used in harsh, yard conditions and had to give it extreme reliability.
Four
Five
Riveting copper plate three times and fastened with screws.
Riveting hammer as well, drilled from the side and nail it - gently stir.
Live as a spring-loaded broke it has become - and so two days the workers killed!
Posted in [mergetime] 1348341225 [/ mergetime]
allow 10 minutes - finish!
Eight
Nine
Ten
Toning the butt of brown, metal - black (alcohol stain)
Twelve
To download the photo found on a plate for fastening a belt on the butt and the bracket on the barrel. He drank from a suitable piece of aluminum, painted in black color embedded flush with the surface and screws. (screws unfortunately crusades - historical justice violated)
On the muzzle just prisobachil carnations folded the letter P and hammered into the drilled holes.
Responsibility for the manufacture of the belt hung on parents tomboy (like the trunk has to give and do not bother looking for a suitable ribbon)
Thirteen
Fourteen
All end
Varnishing couple of times with varnish for outdoor use.
Source:
I fired up the idea, downloaded a number of images and set to work. The idea arose to post in the middle of the work - so the initial stage there are no photos. About the size of a seven-year customized fighter.
Material effect acquired profession - tree species - Ash!
Two
Under the hands of scrap ash fell 500 * 200 * 50mm
From it all and manufactured. I painted on a piece of cardboard about and cut the contour. Not to impose the workpiece and cut from a single piece with the butt forearm. Clutching at tisochki and began whittling "swallow", or whatever it is called.
Three
The barrel sawed apart, spaced slots and milled oberfrezerom.
He also drove the radius R 5 on the perimeter of the blank to screw the screws on tsevyu hidden under caps and kley.Tak the designated store.
All the same, the weapon will be used in harsh, yard conditions and had to give it extreme reliability.
Four
Five
Riveting copper plate three times and fastened with screws.
Riveting hammer as well, drilled from the side and nail it - gently stir.
Live as a spring-loaded broke it has become - and so two days the workers killed!
Posted in [mergetime] 1348341225 [/ mergetime]
allow 10 minutes - finish!
Eight
Nine
Ten
Toning the butt of brown, metal - black (alcohol stain)
Twelve
To download the photo found on a plate for fastening a belt on the butt and the bracket on the barrel. He drank from a suitable piece of aluminum, painted in black color embedded flush with the surface and screws. (screws unfortunately crusades - historical justice violated)
On the muzzle just prisobachil carnations folded the letter P and hammered into the drilled holes.
Responsibility for the manufacture of the belt hung on parents tomboy (like the trunk has to give and do not bother looking for a suitable ribbon)
Thirteen
Fourteen
All end
Varnishing couple of times with varnish for outdoor use.
Source:
