528
Dismantling of crane-installation
Recently we rocked other ancient and dismantled tower crane KB 308, replaced the pivot bearing, and then collected back. Building tower crane dismantled for the first time in his life, before lesopogruzochnye yuzali. The differences, as it turned out, the weight, plus it's almost 40-year-old rusty asshole. Photos and videos a lot, but then decreased to light sketches.
Will be 16 photos and 2 videos
1. lower the boom boom winch.
2. Fold fermu1 farm 2 with the mounting of the cable. The same method is used in the construction crane to build a crane high.
3.Predvaritelno cleaned oblique stops, so that he could emerge. On tap my friend, Spiderman))
4. Stroplyu Boom Truck without unhooking shrouds chain hoist.
5.Stoporyu ogolovochnyh blocks on guys, otherwise they will fly up and then fuck them out by hand))
6.Vid top without boom, boom already at the bottom, is disengaged.
7. cab stand comfortably, smooth surface, not what the boom run
8.Malenkie such studs, secured the very oblique stops. Do not remove, had cut off the gas.
Assessment 9. crane directly from the cabinet from the panel.
10.Zver defeated, first standing on the palm, such as fork
11.Vilka removed, the crane is already on the cells, laid rope pulley block. Confusing, then the headache during assembly.
12.Oporno-rotator, it was bearing the failed.
13.Krepitsya bearing bolts 90, broke two open-end wrench, 2 flare and one gear, so all rusted over the years. Here is the latest miracle turned the bolt 46 on the key 75 and the key, incidentally, also had homemade bungled. Because of the thick iron cap cut, handle 2 meters))
14. This is the lifting crane in the reverse order when replacing the bearing.
15.Stykovka boom locks union could not dock, here I open fracture and earned remained the most a little, missed a crowbar, forcing locking butt and nearly severed his thumb. Docked without me while I assisted in the emergency room))
16. The last two days working in a cast, but the crane is assembled.
Posted in [mergetime] 1376944612 [/ mergetime]
Actually CRANEAGE all)
Source:
Will be 16 photos and 2 videos
1. lower the boom boom winch.
2. Fold fermu1 farm 2 with the mounting of the cable. The same method is used in the construction crane to build a crane high.
3.Predvaritelno cleaned oblique stops, so that he could emerge. On tap my friend, Spiderman))
4. Stroplyu Boom Truck without unhooking shrouds chain hoist.
5.Stoporyu ogolovochnyh blocks on guys, otherwise they will fly up and then fuck them out by hand))
6.Vid top without boom, boom already at the bottom, is disengaged.
7. cab stand comfortably, smooth surface, not what the boom run
8.Malenkie such studs, secured the very oblique stops. Do not remove, had cut off the gas.
Assessment 9. crane directly from the cabinet from the panel.
10.Zver defeated, first standing on the palm, such as fork
11.Vilka removed, the crane is already on the cells, laid rope pulley block. Confusing, then the headache during assembly.
12.Oporno-rotator, it was bearing the failed.
13.Krepitsya bearing bolts 90, broke two open-end wrench, 2 flare and one gear, so all rusted over the years. Here is the latest miracle turned the bolt 46 on the key 75 and the key, incidentally, also had homemade bungled. Because of the thick iron cap cut, handle 2 meters))
14. This is the lifting crane in the reverse order when replacing the bearing.
15.Stykovka boom locks union could not dock, here I open fracture and earned remained the most a little, missed a crowbar, forcing locking butt and nearly severed his thumb. Docked without me while I assisted in the emergency room))
16. The last two days working in a cast, but the crane is assembled.
Posted in [mergetime] 1376944612 [/ mergetime]
Actually CRANEAGE all)
Source: